|September 7, 2010, 02:07||
convergence problem in the turbomachinery problem.
Join Date: Apr 2009
Posts: 16Rep Power: 9
what are the issue for the convergence of a simulation. In my case I am solving a centrifugal fan problem. In which I am simulating the impeller as well as the volute. I imposed the boundary conditions at
1) inlet : total pressure (0 pa relative pressure)
2) Outlet : mass flow rate:
3) impeller : Rotating wall;
4) casing :stationary wall;
I am using the k- omega turbulence model for solving the turbulent quantities.
I set the convergence criteria as 10e-4 for the velocities and the turbulence quantities.
I am solving the momentum equations with High resolution scheme.
I got struck when the simulation is not conversing up to the 10e-4. but I want it must touch the criteria of the 10e-5.
Can anyone help me where may be the problem? Please suggest me. Thank you.
|convergence issues, turbomachinery|
|Thread||Thread Starter||Forum||Replies||Last Post|
|convergence problem||commonyue||Main CFD Forum||1||December 1, 2009 04:54|
|Submerged fin, Convergence problem||supermouniette||FLUENT||10||July 6, 2009 10:47|
|Convergence of CFX field in FSI analysis||nasdak||CFX||2||June 29, 2009 01:17|
|3D Fluid Flow Convergence problem||Emily||FLUENT||2||March 21, 2007 23:18|
|Non Convergence of 3D Heat transfer cfd problem||Balraj||Main CFD Forum||3||December 9, 2004 01:24|