CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   "legend" in CFX-post (http://www.cfd-online.com/Forums/cfx/80569-legend-cfx-post.html)

Jasmine September 29, 2010 19:06

"legend" in CFX-post
 
I want to compare two different results. The velocity fields I draw for the two results have their own range of legend, say, 0-20 and 0-25. How could I make the two legends be in the same range, say, 0-25?

Thank you!

mvoss September 30, 2010 03:27

hi,

not sure if i got you right, but you can use the User-Specified Option as variable range and use 0-25 for both legends.

Josh September 30, 2010 04:24

To elaborate on what neewbie said...

Go to your parameter (contour, vector...) defining velocity and switch from "Global" or "Local" to "User Specified".

This is covered in the tutorials. Time willing, you should complete all of them before proceeding with further analysis. They cover many topics and will save you time in the long-run.


All times are GMT -4. The time now is 01:22.