Need Help on boundary condition in Multi-Phase flow -- CFD Online Discussion Forums

December 9, 2010, 07:53	Need Help on boundary condition in Multi-Phase flow	#1
creddy_trddc New Member creddy Join Date: Aug 2010 Location: Kanpur/UP/India Posts: 25 Rep Power: 15	I want to simulate the flow when Argon-Gas is blown from the bottom in to furnace with molten steel. When the Argon gas reaches the top it has to escape with flotation velocity and for the molten steel the Boundary condition should be Symmetry. I am considering both molten steel and argon gas as continuous fluids. Is it possible to specify this kind of boundary condition directly in CFX?? If I consider Argon gas as dispersed fluid then there is degassing B.C. option is available in CFX....

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How can apply mass flow rate boundary condition?	Sima	Phoenics	1	December 1, 2007 18:55
New topic on same subject - Flow around race car	Tudor Miron	CFX	15	April 2, 2004 06:18
Please help with flow around car modelling!	Tudor Miron	CFX	17	March 19, 2004 19:23
compressible two phase flow in CFX4.4	youngan	CFX	0	July 1, 2003 23:32
Mass flow boundary condition	Síle	FLUENT	0	June 12, 2003 07:30

All times are GMT -4. The time now is 15:51.