CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   Value below interpolation range (http://www.cfd-online.com/Forums/cfx/83197-value-below-interpolation-range.html)

Clif December 19, 2010 10:53

Value below interpolation range
 
Determining the change in heat capacity of the material in the form of tabulated values (temperature, heat capacity) in the section of the function referred to as Function teplo emk further expression in writing Function teplo emk (T), but get an error:

PROBLEM ENCOUNTERED WHEN EXECUTING CFX EXPRESSION LANGUAGE |
| |
| The CFX expression language was evaluating: |
| Specific Heat Capacity |
| |
| The problem was: |
| Value below interpolation range |
| |
| FURTHER INFORMATION |
| |
| The problem was encountered in executing the expression for: |
| Expression teplo emk |
| The complete expression is: |
| Function teplo emk(T) |
| The error occurs on sub-expression: |
| SCALAR_0CELValueMa |
| |
| BACKGROUND INFORMATION |
| |
| The error was detected at one location. The same problem may be |
| present at other locations - that has not been investigated. |
| The following values are for the first location which has the |
| problem. |
| |
| |
| END OF DIAGNOSTIC OUTPUT FOR CFX EXPRESSION LANGUAGE

In what may be the reason?


All times are GMT -4. The time now is 11:10.