CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

static pressure went outside the limite

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 30, 2010, 09:20
Default static pressure went outside the limite
  #1
New Member
 
jarrai
Join Date: Sep 2010
Posts: 7
Rep Power: 15
jarrai is on a distinguished road
Hi,
I simulate thermal-hydraulic performance of the heavy liquid metal,during simulation run i get a Note message:
"while evaluating static entropy,static pressure went outside the limite. it minimum value was -9.8327e3.the bound errror was handled by clipping if this simulation prosist,consider increasing the table range".

Can anybody help me understand the Note message?
jarrai is offline   Reply With Quote

Old   December 30, 2010, 09:28
Default
  #2
New Member
 
Dmitry Semikin
Join Date: Dec 2010
Posts: 16
Rep Power: 15
Dimone is on a distinguished road
Obviously, you use some real liquid model. As I understand for myself for those liquids interdependencies of physical values are described analytically, but passed to solver as table of values. So, you should define the range in which those tables should be precalculated (the range in which material properties can vary). In properties of such materials in second tab (do not remember name exactly) at the bottom there is a property - something like "table range". Give there the min and max values for all physical values, which are used in fluid model being used (pressure, temperature etc.).

If you do not define those settings, you should have warning (or info) message in CFX-Pre output.

Actually, I did not meet this problem, while working with liquids (as I work most with gases), but this happened for me, when I started to use real gases models. There are some explanations on this topic in CFX documentation.
Dimone is offline   Reply With Quote

Old   December 31, 2010, 07:35
Default
  #3
New Member
 
jarrai
Join Date: Sep 2010
Posts: 7
Rep Power: 15
jarrai is on a distinguished road
Thank you for your help:
jarrai is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
simple model, difficult outlet Eric CFX 7 May 23, 2014 09:13
Maintaining Static Pressure at Fluid Flow Inlet cdevalve FLUENT 3 January 14, 2012 01:11
How to achieve constant static pressure in inlet? Zou Jianfeng FLUENT 0 October 21, 2008 02:55
Setting static pressure as the inlet BC ruined FLUENT 1 March 21, 2008 15:57
what the result is negatif pressure at inlet chong chee nan FLUENT 0 December 29, 2001 06:13


All times are GMT -4. The time now is 03:48.