Question about immersed solid method in CFX

spwater · January 2, 2011, 19:28

Hello:

I am studying immersed boundary method and and try to simulate a ball falling in the water. I am using "immersed solid", is that OK? I find I can give a specified velosity to the ball, but I cannot give a density to the ball and let it fall freely.
What can I do?

thank you!

singer1812 · January 4, 2011, 15:41

What are you using the density for in the solid? Having it float in the water? You will need to write that into a CEL expression that controls the motion (velocity) of the ball, or look into using Rigid Body (6DOF), if that is the case.

spwater · January 4, 2011, 18:52

Quote:

Originally Posted by singer1812

What are you using the density for in the solid? Having it float in the water? You will need to write that into a CEL expression that controls the motion (velocity) of the ball, or look into using Rigid Body (6DOF), if that is the case.

Thank you for your reply.
I want to simulate a metal ball fall by gravity in the water.
Where can I selcet the 6DOF solver for a rigid body?
I find little setting opions for a immersed solid.

singer1812 · January 5, 2011, 13:34

What version of cfx are you using? Rigid Body Solver is beta in V12 and full feature in V13.

Beware in V12. You must use the Global coordinate frame as the rigid body coord (there is a bug when it uses a different coordinate system).

spwater · January 7, 2011, 10:04

Quote:

Originally Posted by singer1812

What version of cfx are you using? Rigid Body Solver is beta in V12 and full feature in V13.

Beware in V12. You must use the Global coordinate frame as the rigid body coord (there is a bug when it uses a different coordinate system).

Thank you for your reply, I am using CFX12.1. Where can I find the relate plane to set the proferty like density for the immersed solid? Sorry for this stupid question, but I am still finding the plan......

belgacem · May 22, 2012, 08:24

Hello:

I am also studying immersed boundary method and and try to simulate a block falling in the water. I am using "immersed solid" then rigid body 6DOF and I let it fall freely but it can't stoped in the bottom where the velocity must be zero. I give a density to the block and i let it fall freely under gravity. Noted that the rigid body is defined as an immersed solid. i have specified a stationary coordinate frame that has its origin at the center of mass of the physical rigid body. Another fixed coordinate frame was specified related to the water at rest.
What can I do to stopped the rigid body in the bottom where the potentiel energy must be zero?

thank you!

belgacem · May 24, 2012, 13:05

Hello:

I am also studying immersed boundary method and and try to simulate a block falling in the water. I am using "immersed solid" then rigid body 6DOF and I let it fall freely but it can't stoped in the bottom where the velocity must be zero. I give a density to the block and i let it fall freely under gravity. Noted that the rigid body is defined as an immersed solid. i have specified a stationary coordinate frame that has its origin at the center of mass of the physical rigid body. Another fixed coordinate frame was specified related to the water at rest.
What can I do to stopped the rigid body in the bottom where the potentiel energy must be zero?

thank you!

January 2, 2011, 19:28	Question about immersed solid method in CFX	#1
spwater New Member Shui Pei Join Date: Mar 2009 Posts: 27 Rep Power: 17	Hello: I am studying immersed boundary method and and try to simulate a ball falling in the water. I am using "immersed solid", is that OK? I find I can give a specified velosity to the ball, but I cannot give a density to the ball and let it fall freely. What can I do? thank you!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Code for Immersed Boundary Method (ask for help)	syq129	Main CFD Forum	2	November 23, 2010 03:16
CFX doesn't continue calculation...	mactech001	CFX	6	November 15, 2009 21:25
Rigid Body State Variables in Solid Immersed Simulation	Hamidreza	CFX	1	October 19, 2009 06:14
question about pressure correction method	tommewang	Main CFD Forum	1	May 19, 2003 08:10
immersed boundary method with unstructured mesh	x.zhang	Main CFD Forum	0	August 25, 2002 21:57

January 4, 2011, 15:41		#2
singer1812 Senior Member Edmund Singer P.E. Join Date: Aug 2010 Location: Minneapolis, MN Posts: 511 Rep Power: 20	What are you using the density for in the solid? Having it float in the water? You will need to write that into a CEL expression that controls the motion (velocity) of the ball, or look into using Rigid Body (6DOF), if that is the case.

January 5, 2011, 13:34		#4
singer1812 Senior Member Edmund Singer P.E. Join Date: Aug 2010 Location: Minneapolis, MN Posts: 511 Rep Power: 20	What version of cfx are you using? Rigid Body Solver is beta in V12 and full feature in V13. Beware in V12. You must use the Global coordinate frame as the rigid body coord (there is a bug when it uses a different coordinate system).

May 22, 2012, 08:24		#6
belgacem New Member belgacem Join Date: Jan 2012 Posts: 22 Rep Power: 14	Hello: I am also studying immersed boundary method and and try to simulate a block falling in the water. I am using "immersed solid" then rigid body 6DOF and I let it fall freely but it can't stoped in the bottom where the velocity must be zero. I give a density to the block and i let it fall freely under gravity. Noted that the rigid body is defined as an immersed solid. i have specified a stationary coordinate frame that has its origin at the center of mass of the physical rigid body. Another fixed coordinate frame was specified related to the water at rest. What can I do to stopped the rigid body in the bottom where the potentiel energy must be zero? thank you!

May 24, 2012, 13:05		#7
belgacem New Member belgacem Join Date: Jan 2012 Posts: 22 Rep Power: 14	Hello: I am also studying immersed boundary method and and try to simulate a block falling in the water. I am using "immersed solid" then rigid body 6DOF and I let it fall freely but it can't stoped in the bottom where the velocity must be zero. I give a density to the block and i let it fall freely under gravity. Noted that the rigid body is defined as an immersed solid. i have specified a stationary coordinate frame that has its origin at the center of mass of the physical rigid body. Another fixed coordinate frame was specified related to the water at rest. What can I do to stopped the rigid body in the bottom where the potentiel energy must be zero? thank you!