CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   CFX (https://www.cfd-online.com/Forums/cfx/)
-   -   Importing a project from ICEM to CFX pre (https://www.cfd-online.com/Forums/cfx/84763-importing-project-icem-cfx-pre.html)

faisal_durr February 8, 2011 08:58

Importing a project from ICEM to CFX pre
 
Hi guys, i have made this rectangular room in ICEM with inlet and outlets defined as different parts. I have also applied blocking and mesh onto the geometry. When i try to write an input file for cfx it writes it in a .cfx5 format which cfxpre really cant open. But if i try import>mesh then i can open the .cfx5 file in cfxpre. But this results in just a cube with the mesh. While all my inlet/outlets etc (i.e. parts) do no longer exist. Help plz.... :)

bharath February 9, 2011 09:39

your problem is not clear.try to attach image.In tree structure (like sample.cfx5) expand it.there you can see the parts you created

faisal_durr February 9, 2011 11:20

Thanks Bharath, my problem got solved. All i had to do was convert the mesh into unstructured mesh and import .mesh file into CFX pre.


All times are GMT -4. The time now is 18:51.