CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   Custom view in CFD-Post (http://www.cfd-online.com/Forums/cfx/85334-custom-view-cfd-post.html)

shahpar73 February 23, 2011 10:54

Custom view in CFD-Post
 
How can I create my own view in CFD-Post?
I want to see results on a plane which is not parallel to either planes and unable to get orthogonal view by rotating that plane.

joey2007 February 23, 2011 16:42

you may use the method plane by three points

shahpar73 February 23, 2011 23:00

The plane by three point has already been created and I want to see results on that plane. When I use the "predefined camera" views, I get the plane in vertical. I try to rotate it to horizontal and I get horizontal but not perfectly orthogonal. Any idea to make it orthogonal?

Procyon June 27, 2011 10:53

Heyho,

with information from http://www.cfd-online.com/Forums/cfx...era-views.html

Code:

VIEW:View 1

Camera Mode = User Specified
 CAMERA:
 Option = Pivot Point and Rotation
 Pivot Point = 1.37142, 0.036504, 0.036504
Rotation = -90, 0, 0
Scale = 1.0
Pan = 0,0

 END
 END

Procyon


All times are GMT -4. The time now is 14:01.