CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

Questions about smoke modeling using CFX

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 14, 2011, 12:38
Default Questions about smoke modeling using CFX
  #1
New Member
 
rafik
Join Date: Jan 2011
Posts: 16
Rep Power: 6
rafiktharwat is on a distinguished road
Questions about smoke modeling using CFX
- I am searching for help to simulate a smoke module with Taking in consider in This module :
1-The rate of production of smoke along The Time of Burning
2-Simulating the fire Built-up and to calculate the firing Time to the fire distinguish
3-The rate of Heat Released from the fire Built-up To the distinguish of the fire Due to the complete combustion of The Burning substance (fuel)
4- The temperature variation and palm simulating of the fire and Its effect on The smoke production and movement
5- The concentration of the smoke particles with air
6-The visibility Throw the smoke along the complete Burning process
7- The movement of The Smoke
8-TaKing in consideration the different phenomena of the smoke properties as Coalgate etc...
-I need help in:
1-finding a similar Module
2-References and papers about the previous points Theories and calculations
3-what are the concepts to do this simulation using CFX
4- What is The Ideas to input these equations and the variables in The CFX?
5-And what is the ability to do this simulation using CFX
6-If there is another CFD Software can produce more efficient such simulation better Than CFX

Thanks Very much for wasting your time by my Question
And thanks for Any Ideas and hints about achieving this simulation
rafiktharwat is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
modeling particle transport in ansys cfx 10.0 siavash CFX 9 November 23, 2010 22:21
Reg: Modeling hub leakage flow in CFX venkataramanan.R CFX 3 February 21, 2007 08:46
CFX for Aero-acoustic modeling Saturn CFX 1 December 4, 2006 08:56
CFX for turbulence modeling Sujit CFX 1 August 13, 2003 06:20
CFD Short Course & CFX User Day Chris Reeves CFX 0 September 11, 2000 08:53


All times are GMT -4. The time now is 16:35.