Anisotropic thermal conductivity in an insulated stranded coil

Attesz · April 4, 2011, 05:17

Hi CFX users,

I'm modeling an electromotor inner fluid domain including the heat source solid domains. The main problem is that there are little air gaps between the copper conductors (little circles nearby) and they are insulated by varnish. So towards the conductors the heat transfer coefficient is about the value of the copper, but in the orthogonal directions it is reduced because of the air gaps and the insulation.

My first idea is to write to the support

to help me how to model the anisotropic thermal conductivity via CCL commands as I read in other topics here.

But I'm interested in your other suggestions about the modelling of this problem.

Thanks in advance,
Attila

singer1812 · April 4, 2011, 09:46

Contact support.

This can be done by modifying the material properties in CEL. The limitation is that the orthotropic material properties must be aligned with either the Global Cartisian Coord System, or Global Cylindrical System, so your body has to be aligned right and be of a geometry allows this limitation.

Attesz · April 4, 2011, 10:27

Thanks Edmund, fortunately my geometry is aligned with the GCS, I thought that this is necessary. I'm waiting for the support.

On the other hand, am I right with the approach of the modelling?

singer1812 · April 4, 2011, 10:36

No idea.

I am not clearly picturing what you are trying to model. If you are just determining an HTC to use as a BC, then I wouldnt think you need to use ortho props at all.

On the other hand, if you are trying to model thermal gradients within the solid domain, then perhaps yes.

Attesz · April 4, 2011, 11:08

Quote:

On the other hand, if you are trying to model thermal gradients within the solid domain, then perhaps yes.

Yes, I'm trying to model this. Thanks!

April 4, 2011, 05:17	Anisotropic thermal conductivity in an insulated stranded coil	#1
Attesz Senior Member Attesz Join Date: Mar 2009 Location: Munich Posts: 368 Rep Power: 17	Hi CFX users, I'm modeling an electromotor inner fluid domain including the heat source solid domains. The main problem is that there are little air gaps between the copper conductors (little circles nearby) and they are insulated by varnish. So towards the conductors the heat transfer coefficient is about the value of the copper, but in the orthogonal directions it is reduced because of the air gaps and the insulation. My first idea is to write to the support to help me how to model the anisotropic thermal conductivity via CCL commands as I read in other topics here. But I'm interested in your other suggestions about the modelling of this problem. Thanks in advance, Attila Last edited by Attesz; April 4, 2011 at 07:47.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
thermal conductivity --> anisotropic material	val46	OpenFOAM	17	February 9, 2023 13:03
Anisotropic thermal conductivity	suitup	OpenFOAM	1	July 5, 2019 09:27
Anisotropic Thermal Conductivity	Saturn	CFX	4	January 30, 2007 12:34
anisotropic thermal conductivity	Lugdi	Siemens	0	January 15, 2007 08:03
anisotropic thermal conductivity, please help!	GBLiu	FLUENT	0	June 8, 2006 21:08

April 4, 2011, 09:46		#2
singer1812 Senior Member Edmund Singer P.E. Join Date: Aug 2010 Location: Minneapolis, MN Posts: 511 Rep Power: 20	Contact support. This can be done by modifying the material properties in CEL. The limitation is that the orthotropic material properties must be aligned with either the Global Cartisian Coord System, or Global Cylindrical System, so your body has to be aligned right and be of a geometry allows this limitation.

April 4, 2011, 10:27		#3
Attesz Senior Member Attesz Join Date: Mar 2009 Location: Munich Posts: 368 Rep Power: 17	Thanks Edmund, fortunately my geometry is aligned with the GCS, I thought that this is necessary. I'm waiting for the support. On the other hand, am I right with the approach of the modelling?

April 4, 2011, 10:36		#4
singer1812 Senior Member Edmund Singer P.E. Join Date: Aug 2010 Location: Minneapolis, MN Posts: 511 Rep Power: 20	No idea. I am not clearly picturing what you are trying to model. If you are just determining an HTC to use as a BC, then I wouldnt think you need to use ortho props at all. On the other hand, if you are trying to model thermal gradients within the solid domain, then perhaps yes.