CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   Problem concerning the Air Conditioning Simulation (http://www.cfd-online.com/Forums/cfx/88360-problem-concerning-air-conditioning-simulation.html)

dou_kun May 15, 2011 09:38

Problem concerning the Air Conditioning Simulation
 
Hello, as a rookie in CFX, here I would like to ask a few questions. It would be really appreciated if anyone online could do me a favor^_^
Contexts: I initiated my CFX study with the example of air conditioning simulation in ANSYS CFX Tutorials.But ever since the first few steps,problems have been occuring.
Below is my quedtion:
I have performed the example several times precisely as instructed but finally turned out to be fruitless, that is the running process in CFX solver manager have been aborted. I really want to know why.Please offer me a hand if it is convenient.
I am attaching the out file I obtained from the solver manager. Hope it is of any use.

Out file:
|--------------------------------------------------------------------|
| Message: |
| |
| USER ROUTINE: Thermostat Routine could not be loaded. Please chec- |
| k the Library Path, Library Name and Calling Name. For FORTRAN us- |
| er routines, the Calling Name should be in lower case. |
| |
| |
| |
+================================================= ===================+

+================================================= ===================+
| ****** PROBLEM REPORT ****** |
|--------------------------------------------------------------------|
| Subsystem: Input |
| Subroutine name: ErrAction |
| Severity level: Fatal Error |
| Error message number: 001100279 |
|--------------------------------------------------------------------|
| Message: |
| |
| Stopped in routine UR_REGISTER |
| |
| |
| |
| |
| |
+================================================= ===================+

+--------------------------------------------------------------------+
| An error has occurred in cfx5solve: |
| |
| The ANSYS CFX solver exited with return code 1. No results file |
| has been created. |
+--------------------------------------------------------------------+

End of solution stage.

This run of the ANSYS CFX Solver has finished.

ghorrocks May 15, 2011 18:55

You have some user fortran and it not correctly connected to the solver.


All times are GMT -4. The time now is 02:58.