Need help with modeling of aerated stirred tank

bitkiz · May 16, 2011, 06:14

Hi,

In my thesis, i simulate aerated stirred tank.

I want to change some parameter to study the effect of its such as, inlet air flow rate , impeller speed.

How can I do this? or I must to start a new run every time when i change the value of those parameter.

Sorry for my poor english.

Best regard

ghorrocks · May 16, 2011, 18:57

Have a look at parametric modelling using Workbench. This is pretty easy to do.

bitkiz · May 19, 2011, 01:17

Thank you for your useful answer.

May 16, 2011, 06:14	Need help with modeling of aerated stirred tank	#1
bitkiz New Member Pisut Join Date: May 2011 Posts: 7 Rep Power: 4	Hi, In my thesis, i simulate aerated stirred tank. I want to change some parameter to study the effect of its such as, inlet air flow rate , impeller speed. How can I do this? or I must to start a new run every time when i change the value of those parameter. Sorry for my poor english. Best regard

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
interFoam / bubbleFoam to simulate an aerated tank	Meratb	OpenFOAM Running, Solving & CFD	2	June 9, 2011 07:35
Lift & Turbulent Dispersion in Stirred Tank	ozgur	FLUENT	0	April 23, 2007 10:01
stirred tank Modeling	Randheer Yadav	FLUENT	0	February 17, 2005 01:44
CFX 5.5.1 stirred tank and LES problem	Nishant	CFX	2	September 13, 2002 07:11
Gas-liquid in Stirred tank Modeling in FLUENT4.5	Patchawat	FLUENT	0	February 13, 2001 05:24

May 16, 2011, 18:57		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 7,008 Rep Power: 60	Have a look at parametric modelling using Workbench. This is pretty easy to do.

May 19, 2011, 01:17		#3
bitkiz New Member Pisut Join Date: May 2011 Posts: 7 Rep Power: 4	Thank you for your useful answer.