CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

setting Boundary condition for additional variable

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 18, 2011, 06:04
Default setting Boundary condition for additional variable
  #1
Member
 
anonymous
Join Date: Jan 2011
Posts: 42
Rep Power: 15
fek66 is on a distinguished road
HE ALL ;
I want to set Boundary condition for pollutant ( CO) as aditional variable my line source is in the ground a street at level z=0 .
my Boundary parts are
INLET, OUTLET, symetry ( SIDES 1 et 2) , GROUND , TOP , SOURCE
the emission rate from the source is 0.0001 Kg/s.
If any one experienced can help
fek66 is offline   Reply With Quote

Old   May 18, 2011, 07:08
Default
  #2
Super Moderator
 
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,665
Rep Power: 143
ghorrocks is just really niceghorrocks is just really niceghorrocks is just really niceghorrocks is just really nice
Sounds straight forward. Have you done the tutorials? That will give you some tips on how to get started.

Or what specific problem do you have in setting it up?
ghorrocks is offline   Reply With Quote

Old   May 19, 2011, 05:44
Default
  #3
Member
 
anonymous
Join Date: Jan 2011
Posts: 42
Rep Power: 15
fek66 is on a distinguished road
thanks ;
firstly, I took a look in tutorial , there is an exemple wich treate smoke dispersion. My case deel with a tracer gaz (SF6) realised from a line source within a street. the emission rate is 0.0001 kg/m^3. To simulate the concentration of SF6 I used an additional varaiable CSF6 with a transport equation .
I choose for CSF6 BC :
INLET Value CSF6 =0
OUTLET ZERO FLUX
SYMETRY ( SIDES) ZERO FLUX
TOP ZERO FLUX
GROUND AND LINE SOURCE CSF6 = 0
the simulate concentration CSF6 = f(Z) seems wrong because the minimum conentration value was located at level z=0 wich is not correct.
fek66 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Setting boundary condition for C-grid airfoil quarkz FLUENT 0 December 28, 2010 15:37
Variable boundary condition Sae. kil CFX 0 November 19, 2008 12:00
Boundary condition setting for water hammer proble yizhou FLUENT 1 October 12, 2007 13:16
Variable temperature wall boundary condition Virginie FLUENT 2 October 2, 2007 10:23
Variable Boundary Condition Malcolm CFX 10 June 23, 2005 07:27


All times are GMT -4. The time now is 09:34.