[CFD-Post] High resolution scheme blend factor

siw · May 24, 2011, 11:55

Hi,

Is it possible to plot the high resolution advection scheme blend factor, beta in the equation given in the User Guide?

I cannot find it in the CFD-Post Variable Selector.

Thanks.

ghorrocks · May 24, 2011, 19:15

Yes, they are the variables like Velocity U.beta.

siw · May 26, 2011, 04:50

Thanks Glenn. Is see there's 4 variables (pressure and velocity components). Plots of them did not give me what I expected though.

Likewise, I cannot see a variable for the turbulence intensity. Does one exist? Or must I make a user defined variable? I see what's needed from http://www.cfd-online.com/Wiki/Turbulence_intensity.

Thanks

ghorrocks · May 26, 2011, 06:38

If you have a turbulence model with turbulence intensity you will have it. No need to define a new variable. Can't remember off the top of my head what its name is, turbulent kinetic energy or something like that I think.

siw · May 26, 2011, 07:20

Thanks again, Glenn.

I used the SST model and have made a contour plot of the turbulent kinetic energy (taken from the variable selector), but I'm thinking to include or replace it with a contour plot of turbulence intensity.

ghorrocks · May 26, 2011, 17:23

Oh, you mean turbulence intensity as a ratio of turbulent energy to bulk flow energy? No, this variable does not exist. It is straight forward to add it as a user variable.

May 24, 2011, 11:55	[CFD-Post] High resolution scheme blend factor	#1
siw Senior Member Stuart Join Date: Jul 2009 Location: Portsmouth, England Posts: 733 Rep Power: 25	Hi, Is it possible to plot the high resolution advection scheme blend factor, beta in the equation given in the User Guide? I cannot find it in the CFD-Post Variable Selector. Thanks.

May 24, 2011, 19:15		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,703 Rep Power: 143	Yes, they are the variables like Velocity U.beta. Mazze[ITA] likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
how to understand high resolution scheme and high order scheme	iilw1314	Main CFD Forum	7	April 12, 2022 12:29
High order scheme vs Specified Blend factor 1	realanony87	CFX	1	November 10, 2015 10:36
high resolution scheme	az_f	CFX	0	November 24, 2010 22:52
larger blend factor or high resolution ?	amine	CFX	2	March 4, 2008 20:28
Multicomponent fluid	Andrea	CFX	2	October 11, 2004 05:12

May 26, 2011, 04:50		#3
siw Senior Member Stuart Join Date: Jul 2009 Location: Portsmouth, England Posts: 733 Rep Power: 25	Thanks Glenn. Is see there's 4 variables (pressure and velocity components). Plots of them did not give me what I expected though. Likewise, I cannot see a variable for the turbulence intensity. Does one exist? Or must I make a user defined variable? I see what's needed from http://www.cfd-online.com/Wiki/Turbulence_intensity. Thanks

May 26, 2011, 06:38		#4
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,703 Rep Power: 143	If you have a turbulence model with turbulence intensity you will have it. No need to define a new variable. Can't remember off the top of my head what its name is, turbulent kinetic energy or something like that I think.

May 26, 2011, 07:20		#5
siw Senior Member Stuart Join Date: Jul 2009 Location: Portsmouth, England Posts: 733 Rep Power: 25	Thanks again, Glenn. I used the SST model and have made a contour plot of the turbulent kinetic energy (taken from the variable selector), but I'm thinking to include or replace it with a contour plot of turbulence intensity.

May 26, 2011, 17:23		#6
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,703 Rep Power: 143	Oh, you mean turbulence intensity as a ratio of turbulent energy to bulk flow energy? No, this variable does not exist. It is straight forward to add it as a user variable.