Multi phase flow

skatun · May 25, 2011, 12:57

Hi
I am used to do normal single phase analysis, however now I would like to simulate a hydrofoil sailboat in CFD (Spare time project). Is there any good books I can buy, or tutorials with sample files I can download from somewhere? Should I upgrade to Ansys 13, is it easier in Fluent or rather CFD.

What about Ansys Aqua?

Kim

ghorrocks · May 25, 2011, 18:57

ANSYS aqua will not help you.

You can do this in either CFX or Fluent. Use which ever you are more familiar with. There are no tutorials on hydrofoil sailboats

so you will have to use the existing tutorials and work it out from there.

skatun · May 25, 2011, 20:01

Where can I find the tutorials?

Kartus · May 26, 2011, 05:09

You can find them in the help-sections. Or try google.

Depending on whether fluent or CFX has a tutorial fit to your problem, I would advise you to choose that program. Makes it a lot easier

Hopefully not too off-topic, but does anyone have a tutorial for a fluidized bed in CFX? I just can't find a multi phase (solid-liquid or solid-gas) flow tutorial for CFX...

ghorrocks · May 26, 2011, 06:37

For more obscure tutorial examples it is recommended to talk to CFX support. They have lots of additional examples at their disposal.

Aslan · February 23, 2012, 00:46

Hi
there is a good example about multi-phase in the ansys fluent 12.0 user's guide at p21-1
aslan

mussargin@yahoo.com · July 28, 2014, 06:37

Try:
Ansys CFX tutorials:

Chapter 9: Free Surface Flow Over a Bump

May 25, 2011, 12:57	Multi phase flow	#1
skatun New Member Kim Skatun Join Date: May 2011 Posts: 2 Rep Power: 0	Hi I am used to do normal single phase analysis, however now I would like to simulate a hydrofoil sailboat in CFD (Spare time project). Is there any good books I can buy, or tutorials with sample files I can download from somewhere? Should I upgrade to Ansys 13, is it easier in Fluent or rather CFD. What about Ansys Aqua? Kim

May 25, 2011, 20:01	tutorials	#3
skatun New Member Kim Skatun Join Date: May 2011 Posts: 2 Rep Power: 0	Where can I find the tutorials?

February 23, 2012, 00:46	Multi-phase example	#6
Aslan New Member S. R. Aslan Join Date: Feb 2012 Posts: 1 Rep Power: 0	Hi there is a good example about multi-phase in the ansys fluent 12.0 user's guide at p21-1 aslan

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
behavior of two phase flow in a pipe	Sonia84	FLUENT	5	September 17, 2013 16:31
Two phase flow in a distributor	Mohsin	FLUENT	5	May 24, 2010 02:57
High Speed multi phase flow	jonita Macyte	Main CFD Forum	0	March 19, 2010 06:46
how 2 freeze 1 phase flow field & start lagrangian	KK	CFX	5	February 14, 2008 16:48
low speed compressible two phase flow??	cat	CFX	0	November 15, 2005 07:59

May 25, 2011, 18:57		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,700 Rep Power: 143	ANSYS aqua will not help you. You can do this in either CFX or Fluent. Use which ever you are more familiar with. There are no tutorials on hydrofoil sailboats so you will have to use the existing tutorials and work it out from there.

May 26, 2011, 05:09		#4
Kartus New Member Join Date: May 2011 Posts: 9 Rep Power: 14	You can find them in the help-sections. Or try google. Depending on whether fluent or CFX has a tutorial fit to your problem, I would advise you to choose that program. Makes it a lot easier Hopefully not too off-topic, but does anyone have a tutorial for a fluidized bed in CFX? I just can't find a multi phase (solid-liquid or solid-gas) flow tutorial for CFX...

May 26, 2011, 06:37		#5
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,700 Rep Power: 143	For more obscure tutorial examples it is recommended to talk to CFX support. They have lots of additional examples at their disposal.

July 28, 2014, 06:37		#7
mussargin@yahoo.com New Member Mustafa Join Date: Jul 2014 Posts: 1 Rep Power: 0	Try: Ansys CFX tutorials: Chapter 9: Free Surface Flow Over a Bump