Creating Face in CFD Post and export Values as Boundary Conditions

flow87 · June 2, 2011, 08:46

Hello at all,

I have a problem at CFD Post:

I have a pipe in a room and now I need a surface in the pipe to average values like the temperature. But there i didnt create a surface in ICEM, so i cant choose it. How do i create this now?
I can only create a plane which fills the whole room but not only the pipe.

And if I created the surface, I want to export the values of it and import it to a new CFX Pre as boundary conditions.

Thanks!

Flow

ghorrocks · June 2, 2011, 19:21

You can put limits on plane extents. Or you can use a isosurface to define a sub-surface - define a surface limited by x=1mm and x=2mm (say) with a contour function and make a user surface from that contour band.

flow87 · June 4, 2011, 04:06

Thank you a lot.

Do you have an idea, how i can export this values as boundary values at a new simulation?

June 2, 2011, 08:46	Creating Face in CFD Post and export Values as Boundary Conditions	#1
flow87 New Member Join Date: Jun 2011 Posts: 2 Rep Power: 0	Hello at all, I have a problem at CFD Post: I have a pipe in a room and now I need a surface in the pipe to average values like the temperature. But there i didnt create a surface in ICEM, so i cant choose it. How do i create this now? I can only create a plane which fills the whole room but not only the pipe. And if I created the surface, I want to export the values of it and import it to a new CFX Pre as boundary conditions. Thanks! Flow

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Export from post gives different result between v11 and v12	bennn	CFX	2	February 10, 2011 05:38
CFX Post export problem	jeff_F	CFX	0	August 17, 2009 21:25
Variable export from CFX post	Ram	CFX	2	October 20, 2005 06:00

June 2, 2011, 19:21		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,703 Rep Power: 143	You can put limits on plane extents. Or you can use a isosurface to define a sub-surface - define a surface limited by x=1mm and x=2mm (say) with a contour function and make a user surface from that contour band.

June 4, 2011, 04:06		#3
flow87 New Member Join Date: Jun 2011 Posts: 2 Rep Power: 0	Thank you a lot. Do you have an idea, how i can export this values as boundary values at a new simulation?