CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Error #001100279 in transient solver

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 19, 2012, 18:18
Default Error #001100279 in transient solver
  #1
Senior Member
 
navid
Join Date: Jan 2010
Posts: 110
Rep Power: 16
ndabir is on a distinguished road
Hi all,

I am trying to simulate a 2d problem. the problem is: two concentric solid circles are present and between them is water as the fluid medium. the one in the middle is very small and the outer one is much bigger. The inner one has boundary pressure of 10 MPa and the outer one has 1 atm pressure. I want to simulate the transient shock propagation from the inner circle towards the outer one. I have also set the primitive boundaries that were generated to make the model 2.5 D, as symmetry BC. My time step is very small (1e-014) cause whole process is happening in less than micro second. When I run the solver, it doesn't solve at all and instead give this error:

Error #001100279 has occurred in subroutine ErrAction.
message: Floating point exception: invalid number
message: stopped in routine FPX: C_FPX_HANDLER



I have gone through previous posts in the forum and I know how to deal with floating point and I have tried all of them but still I have problem. I also use double precision.

I have solved the same problem successfully in fluent with air as the fluid medium using explicit density based solver but since CFX has a good equation of state for water and fluent does not have any, I decided to solve it in CFX.

Any idea where am I making mistake?
ndabir is offline   Reply With Quote

Old   April 19, 2012, 19:24
Default
  #2
Super Moderator
 
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,665
Rep Power: 143
ghorrocks is just really niceghorrocks is just really niceghorrocks is just really niceghorrocks is just really nice
You mention air and water. Is this a multiphase simulation?

Firstly I would run this simulation with a simple EOS, maybe ideal gas or something simple close to your real fluid. Does it run with a simple EOS?
ghorrocks is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
thobois class engineTopoChangerMesh error Peter_600 OpenFOAM 4 August 2, 2014 10:52
smoothSolver diverges - solution in using PBiCG solver? makaveli_lcf OpenFOAM Running, Solving & CFD 3 September 11, 2013 13:44
compressible transient mixture of 3 gases - is there a suitable solver? Axel_T OpenFOAM Running, Solving & CFD 2 January 17, 2010 01:24
desperate Fatal overflow in linear solver - transient kingjewel1 CFX 9 January 5, 2010 14:53
Transient UDS with coupled solver Dmitriy Makarov FLUENT 1 February 9, 2007 18:06


All times are GMT -4. The time now is 18:11.