Problems with transient flow in CFX

td2e09 · June 17, 2011, 02:44

Good morning everyone. I am currently trying to run a transient problem in Ansys CFX. When I try to load up any one the .trn files in CFD-post, I keep getting the following error message.

ERROR
Error reading file 'C:\Users\td2e09\Desktop\Split channel\Experiments April 2011\600mm_fence_8.6m_from_inlet_003.dir\8.trn':
Error reading number of domains (G/NZN).

My problem has a normal large domain and one subdomain, which I am applying a momentum loss to. Can anyone shed any light on why I might be getting this error message and what it is I am doing wrong. Thank you.

ghorrocks · June 17, 2011, 08:06

Is it a full transient file including the mesh, or a partial one? You cannot load trn file with no meshes by themselves. You need to access it from the results file.

td2e09 · June 17, 2011, 08:15

Quote:

Originally Posted by ghorrocks

Is it a full transient file including the mesh, or a partial one? You cannot load trn file with no meshes by themselves. You need to access it from the results file.

Good afternoon, and thank you for your message. It is a full transient file. I have the results file and can open the results file in CFD post no problem. Then i go to File-Load results, and select the .trn file to open. But then it displays the error message. Do you have any idea what i might be doing wrong here. Thank you

ghorrocks · June 17, 2011, 08:43

If the trn file is a timestep of a run which completed and gave a results file then you do not open the trn file with file-load. You access it by loading the results file and selecting the timestep you wish and it will automatically load the trn file. You do not need to open it yourself.

June 17, 2011, 02:44	Problems with transient flow in CFX	#1
td2e09 New Member Join Date: Aug 2010 Posts: 6 Rep Power: 4	Good morning everyone. I am currently trying to run a transient problem in Ansys CFX. When I try to load up any one the .trn files in CFD-post, I keep getting the following error message. ERROR Error reading file 'C:\Users\td2e09\Desktop\Split channel\Experiments April 2011\600mm_fence_8.6m_from_inlet_003.dir\8.trn': Error reading number of domains (G/NZN). My problem has a normal large domain and one subdomain, which I am applying a momentum loss to. Can anyone shed any light on why I might be getting this error message and what it is I am doing wrong. Thank you.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
setup problems - LES pipe flow with cyclic BC (1) and direct mapped inlet (2)	florian_krause	OpenFOAM	21	March 15, 2013 10:27
Transient animation performance in CFX 5.5 POST	Sjoerd Romkes	CFX	8	February 5, 2013 14:53
Ansys 11.0 CFX - solving electric potentials and multiphase flow	cfd_multiphyiscs	CFX	2	March 10, 2010 13:43
Help: CFX for granular flow	Dejun Jing	CFX	3	July 16, 2002 04:45
Turbulence model for Transient Pipe Flow Modeling	Brian	FLUENT	0	June 7, 2002 12:15

June 17, 2011, 08:06		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 7,008 Rep Power: 60	Is it a full transient file including the mesh, or a partial one? You cannot load trn file with no meshes by themselves. You need to access it from the results file.

June 17, 2011, 08:43		#4
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 7,008 Rep Power: 60	If the trn file is a timestep of a run which completed and gave a results file then you do not open the trn file with file-load. You access it by loading the results file and selecting the timestep you wish and it will automatically load the trn file. You do not need to open it yourself.