[zacko]

Hello everyone,



i was thinking about doing a batch file to automate my post-processing whcih incldues a simple contour (later export a .png-file and the export of a .csv.



I was mainly guided throuhg the common tutorial provided by Ansys (http://200.19.248.10:8002/professore...Processing.pdf)

I did every single step with creating a session file, ect.
I tested the .cse File from CFD-Post with the CFX launcher and it worked, and exported a .csv, but when I added the loop lines from the tutorial, I get an error : "Unrecognized character \xC2 <eval 77> line 7. But in line 7 is nothing. I deleted the first comments, but still the error occurs in line 7.


Hopefully it's just a tiny mistake that I made.



Would be very thankful for help.
Best regards


Daniel

COMMAND FILE:
   CFX Post Version = 14.0
END

!foreach $res ('R01_alpha_30_Dep_d_01micro_dt1Em08_n8000_v2.res','R01_alpha_30_Dep_d_01micro_dt1Em07_n8000_v2.res')
!{
! print “Processing $res\n”;
! @temp = split('_001.res',$res);
! $type = $temp[0];



DATA READER:
  Clear All Objects = false
  Append Results = false
  Edit Case Names = false
  Multi Configuration File Load Option = Last Case
  Open in New View = true
  Keep Camera Position = true
  Load Particle Tracks = true
  Multi Configuration File Load Option = Last Case
  Open to Compare = false
  Files to Compare =
END

DATA READER:
  Domains to Load=
END

>load filename= $res
# Sending visibility action from ViewUtilities
>show /DATA READER/CASE:Case R01_alpha_30_Dep_d_01micro_dt1Em08_n8000_v2/RES \
PARTICLE TRACK:Res PT for H2Ol, view=/VIEW:View 1


DATA READER:
  CASE:Case R01_alpha_30_Dep_d_01micro_dt1Em08_n8000_v2
    RES PARTICLE TRACK:Res PT for H2Ol
      Activate Filter = On
      Any All Condition = Match ALL
      Apply Instancing Transform = On
      Colour = 0.75, 0.75, 0.75
      Colour Map = Default Colour Map
      Colour Mode = Constant
      Colour Scale = Linear
      Colour Variable = Pressure
      Colour Variable Boundary Values = Hybrid
      Culling Mode = No Culling
      Domain List = Domain 1
      Draw Faces = On
      Draw Lines = Off
      Draw Symbols = Off
      Draw Tracks = On
      Ending Boundary = Wall
      Filter On Diameter = Off
      Filter On End = On
      Filter On Start = Off
      Filter On Track Selection = Off
      Font = Sans Serif
      Instancing Transform = /DEFAULT INSTANCE TRANSFORM:Default Transform
      Lighting = On
      Limit Track Option = Up To Current Timestep
      Line Width = 1
      Max = 0.0 [Pa]
      Maximum Number of Tracks = 8000
      Min = 0.0 [Pa]
      Number of Sides = 8
      Option = From Res
      Particle Diameter = 1e-007 [m]
      Particle Diameter Condition = gt
      Particle Diameter Condition Two = NA
      Particle Diameter Two = 1e-007 [m]
      Range = Global
      Reduction Factor = 1.0
      Reduction or Max Tracks = Max Tracks
      Show Track Labels = Off
      Specular Lighting = On
      Starting Boundary = Inlet
      Surface Drawing = Smooth Shading
      Symbol Max Time Selection = User Specified
      Symbol Scale Type = Relative
      Symbol Size = 1.0
      Symbol Size Option = Constant
      Symbol Start Time = 10.0 [s]
      Symbol Stop Time = -10.0 [s]
      Symbol Time Interval = 1.0 [s]
      Text Colour = 0, 0, 0
      Text Colour Mode = Default
      Text Height = 0.024
      Track Drawing Mode = Line
      Track End Distance = 0.0 [m]
      Track End Time = 0.0 [s]
      Track Limit Type = Time
      Track Line Width = 2
      Track Size = 1.0
      Track Start Distance = 0.0 [m]
      Track Start Time = 0.0 [s]
      Track Symbol = Ball
      Transparency = 0.0
      OBJECT VIEW TRANSFORM:
        Apply Reflection = Off
        Apply Rotation = Off
        Apply Scale = Off
        Apply Translation = Off
        Principal Axis = Z
        Reflection Plane Option = XY Plane
        Rotation Angle = 0.0 [degree]
        Rotation Axis From = 0 [m], 0 [m], 0 [m]
        Rotation Axis To = 0 [m], 0 [m], 0 [m]
        Rotation Axis Type = Principal Axis
        Scale Vector = 1 , 1 , 1
        Translation Vector = 0 [m], 0 [m], 0 [m]
        X = 0.0 [m]
        Y = 0.0 [m]
        Z = 0.0 [m]
      END
    END
  END
END
# Sending visibility action from ViewUtilities
>show /DATA READER/CASE:Case R01_alpha_30_Dep_d_01micro_dt1Em08_n8000_v2/RES \
PARTICLE TRACK:Res PT for H2Ol, view=/VIEW:View 1


CONTOUR:Contour 1
  Apply Instancing Transform = On
  Clip Contour = Off
  Colour Map = Default Colour Map
  Colour Scale = Linear
  Colour Variable = H2Ol.Wall Mass Flow Density
  Colour Variable Boundary Values = Hybrid
  Constant Contour Colour = Off
  Contour Range = Local
  Culling Mode = No Culling
  Domain List = /DOMAIN GROUP:All Domains
  Draw Contours = On
  Font = Sans Serif
  Fringe Fill = On
  Instancing Transform = /DEFAULT INSTANCE TRANSFORM:Default Transform
  Lighting = On
  Line Colour = 0, 0, 0
  Line Colour Mode = Default
  Line Width = 1
  Location List = Wall
  Max = 0.0 [kg m^-2 s^-1]
  Min = 0.0 [kg m^-2 s^-1]
  Number of Contours = 11
  Show Numbers = Off
  Specular Lighting = On
  Surface Drawing = Smooth Shading
  Text Colour = 0, 0, 0
  Text Colour Mode = Default
  Text Height = 0.024
  Transparency = 0.0
  Value List = 0 [kg m^-2 s^-1],1 [kg m^-2 s^-1]
  OBJECT VIEW TRANSFORM:
    Apply Reflection = Off
    Apply Rotation = Off
    Apply Scale = Off
    Apply Translation = Off
    Principal Axis = Z
    Reflection Plane Option = XY Plane
    Rotation Angle = 0.0 [degree]
    Rotation Axis From = 0 [m], 0 [m], 0 [m]
    Rotation Axis To = 0 [m], 0 [m], 0 [m]
    Rotation Axis Type = Principal Axis
    Scale Vector = 1 , 1 , 1
    Translation Vector = 0 [m], 0 [m], 0 [m]
    X = 0.0 [m]
    Y = 0.0 [m]
    Z = 0.0 [m]
  END
END

# Sending visibility action from ViewUtilities
>show /CONTOUR:Contour 1, view=/VIEW:View 1

VIEW:View 1
  Camera Mode = User Specified
  CAMERA:
    Option = Pivot Point and Quaternion
    Pivot Point = 0.088, 0.00268059, 0.153989
    Scale = 31.6704
    Pan = 0, 0
    Rotation Quaternion = -0.399329, 0.0227511, 0.0423899, 0.915544
  END

END

> update

! $exfile = "chart".$type.".csv";

EXPORT:
  ANSYS Export Data = Element Heat Flux
  ANSYS File Format = ANSYS
  ANSYS Reference Temperature = 0.0 [K]
  ANSYS Specify Reference Temperature = Off
  ANSYS Supplemental HTC = 0.0 [W m^-2 K^-1]
  BC Profile Type = Inlet Velocity
  Export Connectivity = Off
  Export Coord Frame = Global
  Export File = $exfile
  Export Geometry = On
  Export Location Aliases =
  Export Node Numbers = On
  Export Null Data = On
  Export Type = Generic
  Export Units System = Current
  Export Variable Type = Current
  Include File Information = Off
  Include Header = On
  Location List = Wall
  Null Token = null
  Overwrite = On
  Precision = 8
  Separator = ", "
  Spatial Variables = X,Y,Z
  Variable List = Yplus
  Vector Brackets = ()
  Vector Display = Scalar
END
>export
>close
!}


# Session file stopped:  2020/01/14 10:19:22