CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   Turbulence wall BC (http://www.cfd-online.com/Forums/cfx/92992-turbulence-wall-bc.html)

Far October 1, 2011 02:10

Turbulence wall BC
 
I know that for the SST model, following wall boundary condition (also known as menter BC) is used:

\omega_{wall} = 10\frac{6\nu}{\beta_{\omega}y^{2}_{\delta}}

now instead of above, I want to use the following condition (also know as wilcox BC) for wall in SST model:

\omega_{wall} = \frac{6\nu}{\beta_{\omega}y^{2}_{\delta}}

1. How to do in CFX?

2. Is it possible with the help of CEL? if yes, how?

References :

1. SST http://turbmodels.larc.nasa.gov/sst.html

2. Wilcox K omega http://turbmodels.larc.nasa.gov/wilcox.html

Regards
Far


All times are GMT -4. The time now is 16:32.