CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   time and output boundary (http://www.cfd-online.com/Forums/cfx/93940-time-output-boundary.html)

ashakn October 31, 2011 13:23

time and output boundary
 
hi everybody
i have 2 question. i am simulating flow around pier of a bridge in river and . i have a control volume of river and the pier is in it.
1- i have 2 boundary. inlet and outlet. i define velocity for inlet. but i dont know what define for outlet. pressure or velocity or ....? and how can i define that?

2-i want to simulate for 35 min time.but i want extract 2, 5, 12 and ... minutes from this simulation output. so where can i define 35 min for cfx? and how can i extract several minutes of this simulation?

thanks a lot

Lance November 1, 2011 04:23

It sounds like you need to do a few tutorials to get the hang of CFX. Tutorial 6 (Flow from a circular vent) deals with a transient setup. But really, do as many tutorials as possible.

To save data at specific times, see the Output control/Trn Results tab.


All times are GMT -4. The time now is 12:35.