CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   CFX (http://www.cfd-online.com/Forums/cfx/)
-   -   Coupling MPCCI with CFX (http://www.cfd-online.com/Forums/cfx/94330-coupling-mpcci-cfx.html)

omidiut November 12, 2011 04:59

Coupling MPCCI with CFX
 
Hi dear members


I have a question! Can i couple Abaqus with CFX by MPCCi ?



Best regards

Alanseu November 12, 2011 10:40

CFX can deal with FSI
you can use Fluent, MPCCI, ABAQUS

omidiut November 23, 2011 08:07

Thanks for reply dear Alanseu
How can i couple CFX with Abqus?


Best regards

ghorrocks November 23, 2011 19:44

You can do it through MPCCI. You will almost certainly have to contact ABAQUS and ANSYS support to get it working.

stumpy November 24, 2011 10:42

My advice is don't bother trying MPCCI. If you want to do FSI with CFX then use ANSYS Mechanical. If you must use Abaqus then look at a CFD code that support a connection to Abaqus, but from what I've seen these aren't as good as FSI with CFX - ANSYS for various reasons. MPCCI is difficult to set up, has limited features (e.g. explicit coupling only) and you won't get much help from ANSYS support since it's not their product.

ghorrocks November 24, 2011 17:55

I agree with stumpy - if you can move to CFX/ANSYS it will be much better.


All times are GMT -4. The time now is 08:29.