Coupling MPCCI with CFX

omidiut · November 12, 2011, 03:59

Hi dear members

I have a question! Can i couple Abaqus with CFX by MPCCi ?

Best regards

Alanseu · November 12, 2011, 09:40

CFX can deal with FSI
you can use Fluent, MPCCI, ABAQUS

omidiut · November 23, 2011, 07:07

Thanks for reply dear Alanseu
How can i couple CFX with Abqus?

Best regards

ghorrocks · November 23, 2011, 18:44

You can do it through MPCCI. You will almost certainly have to contact ABAQUS and ANSYS support to get it working.

stumpy · November 24, 2011, 09:42

My advice is don't bother trying MPCCI. If you want to do FSI with CFX then use ANSYS Mechanical. If you must use Abaqus then look at a CFD code that support a connection to Abaqus, but from what I've seen these aren't as good as FSI with CFX - ANSYS for various reasons. MPCCI is difficult to set up, has limited features (e.g. explicit coupling only) and you won't get much help from ANSYS support since it's not their product.

ghorrocks · November 24, 2011, 16:55

I agree with stumpy - if you can move to CFX/ANSYS it will be much better.

November 12, 2011, 03:59	Coupling MPCCI with CFX	#1
omidiut Senior Member omid Join Date: Apr 2011 Posts: 105 Rep Power: 14	Hi dear members I have a question! Can i couple Abaqus with CFX by MPCCi ? Best regards

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pressure-Velocity Coupling in CFX	LSC	CFX	24	November 1, 2019 06:37
Different flow pattern between OpenFOAM and CFX	AirS	OpenFOAM	0	January 12, 2010 07:08
heat generation in CFX	Ema	CFX	4	August 7, 2009 05:39
ANSYS Multi-physics and CFX coupling error	anujit	CFX	3	June 21, 2009 18:39
CFX 4.4 installation problem	Pandu Sattvika	CFX	1	December 1, 2001 04:07

November 12, 2011, 09:40		#2
Alanseu New Member Wei Zhao Join Date: Apr 2011 Posts: 9 Rep Power: 15	CFX can deal with FSI you can use Fluent, MPCCI, ABAQUS

November 23, 2011, 07:07		#3
omidiut Senior Member omid Join Date: Apr 2011 Posts: 105 Rep Power: 14	Thanks for reply dear Alanseu How can i couple CFX with Abqus? Best regards

November 23, 2011, 18:44		#4
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,700 Rep Power: 143	You can do it through MPCCI. You will almost certainly have to contact ABAQUS and ANSYS support to get it working.

November 24, 2011, 09:42		#5
stumpy Senior Member Join Date: Apr 2009 Posts: 531 Rep Power: 21	My advice is don't bother trying MPCCI. If you want to do FSI with CFX then use ANSYS Mechanical. If you must use Abaqus then look at a CFD code that support a connection to Abaqus, but from what I've seen these aren't as good as FSI with CFX - ANSYS for various reasons. MPCCI is difficult to set up, has limited features (e.g. explicit coupling only) and you won't get much help from ANSYS support since it's not their product.

November 24, 2011, 16:55		#6
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,700 Rep Power: 143	I agree with stumpy - if you can move to CFX/ANSYS it will be much better.