Pattern and Save CFX Results

Riley · September 29, 2021, 10:53

I'm aiming to create a contour on a plane which crosses the periodic boundary. With rotational transform applied in CFD Post, Image1 is produced. I'd instead like to produce Image2.

Is there a method to pattern the flow field results and save them?

Opaque · September 29, 2021, 12:22

May I ask how you created the initial locator before the replication?

Riley · September 30, 2021, 09:24

I'm not certain what you mean by "locator". The plane was defined by three points. The x,y,z coordinates of these points was determined in Solidworks.

September 29, 2021, 12:22		#2
Opaque Senior Member Join Date: Jun 2009 Posts: 1,804 Rep Power: 32	May I ask how you created the initial locator before the replication? __________________ Note: I do not answer CFD questions by PM. CFD questions should be posted on the forum.

September 30, 2021, 09:24		#3
Riley New Member Join Date: Aug 2019 Posts: 14 Rep Power: 6	I'm not certain what you mean by "locator". The plane was defined by three points. The x,y,z coordinates of these points was determined in Solidworks.