CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Block structured hexagonal mesh vs automated tetra mesh inside Workbench for CFD

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 26, 2011, 15:52
Default Block structured hexagonal mesh vs automated tetra mesh inside Workbench for CFD
  #1
Senior Member
 
Join Date: Oct 2010
Location: Zurich
Posts: 176
Rep Power: 15
Chander is on a distinguished road
Hi,

I have been using CFX for the last one year and so far I have always used block-structured hexagonal meshes, generated in ICEM CFD, for my CFX simulations.
Now I want to use Workbench to parametrise my geometry and explore the effects of geometrical changes on CFD results. I am not very familiar with Workbench.
Is doing a block structured hexagonal meshing possible inside Workbench. I have Ansys versions 12.1 and 13.0 on my system. I could not find any tutorials related to this for both versions. I found a tutorial named "Workbench Integration" for ICEM CFD 11.0 but I could not do that tutorial in versions 12.1 or 13.0 as the tutorial mentions a totally different GUI.


If there is no way to perform block structured hexagonal meshing in Workbench, then I will have to use the automated Tetra meshing available in Workbench 12.1 or 13.0. I have never used automated tetra mesh before and I am not sure about using it as I have heard that structured hexagonal mesh is always more accurate for fluid flow.

In summary, my questions are:
a) If it is possible, then how to do and automate a block structured hexagonal meshing (similar to ICEM CFD) inside Workbench? Is there any tutorial for this?

b) How accurate it is in general to use automated tetra meshing for fluid flow instead of block structured tetra meshing?

Thanks for your inputs!
Chander is offline   Reply With Quote

Old   November 27, 2011, 05:14
Default
  #2
Super Moderator
 
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,665
Rep Power: 143
ghorrocks is just really niceghorrocks is just really niceghorrocks is just really niceghorrocks is just really nice
You can do hex meshes in WB, the mapped mesh feature and sweep meshes are useful for this. But they are no where near as powerful and ICEM hexa and frustrating to use in my opinion. But if you want to parameterise your geometry it is easiest way.

You can also parameterise ICEM I think, especially in V13.
ghorrocks is offline   Reply With Quote

Old   November 27, 2011, 17:00
Default
  #3
Senior Member
 
Join Date: Oct 2010
Location: Zurich
Posts: 176
Rep Power: 15
Chander is on a distinguished road
Thanks Glen for your reply.

I could not find anything inside ICEM 13 to parameterise my geomtry. May be recording and relaying script can work?

However, the main issue is that I want to do a ggeometry shae optimization using CFD and i is for that purpose I want to use Workbench by using its response surface optimization feature.

I think ICEM cannot be included as a module inside Workbench and so , even if parameterisation is possible in ICEM, it will not be useful.

Is there any other way, apart from Workbench, by which I can combine a geometry and meshing software, a CFD solver like CFX and an optimizer to automate the optimization process?
Chander is offline   Reply With Quote

Old   November 27, 2011, 17:24
Default
  #4
Super Moderator
 
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,665
Rep Power: 143
ghorrocks is just really niceghorrocks is just really niceghorrocks is just really niceghorrocks is just really nice
ICEM is in WB. Have a look on the forum about remeshing in ICEM. But you should talk to CFX support about this, they will put you on the right track quickest.

Optimisation can be done by many methods, none of them straight forward. The whole point of WB was to make this sort of thing easier.
ghorrocks is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
2d irregular grid Remy Main CFD Forum 1 December 22, 2008 05:49
Icemcfd 11: Loss of mesh from surface mesh option? Joe CFX 2 March 26, 2007 19:10
gallery for 3D block structured mesh Pei-Ying Hsieh Main CFD Forum 1 April 18, 2006 17:31
Structured Grid Definition craig shores Main CFD Forum 3 March 21, 2001 15:48
unstructured vs. structured grids Frank Muldoon Main CFD Forum 1 January 5, 1999 11:09


All times are GMT -4. The time now is 13:24.