update initial conditions every 10 iterations

lindner · November 28, 2011, 06:45

Hi all,
I'm testing the whole operation curve of a hydraulic turbine, but the net head is highly dependent of the mass flow.
I want to update the Total Pressure inlet condition every 10 timesteps, to match the new losses.
The inlet condition would be something like this:
Ptotal,in = 115000[Pa] - k*Q^2
where k is a constant for losses and Q the massflow.

is it possible to do with cel expressions to update the boundary every 10 or more iterations?

Thank you in advance,
lindner

Cluain · November 28, 2011, 09:06

Yes, you can. However, you will have to do an expression for the current P rather than the total.
Just set the input to an expression and define the expression for current pressure.
CEL is quite easy to learn and there are quite a few specific examples in the tutorials provided with CFX, just watch the units.
Hope this helps.

lindner · November 28, 2011, 10:41

Hi Martin,
Thanks for the quick answer! The cel expression is ok now, the only problem is to force the cfx to execute this expression every x timesteps (without fortran).
Im reading about user functions and user subroutine to find something about it.

Cluain · November 28, 2011, 11:25

Great, a simple iterative function should sort that. A bit of imagination and you will have it.

November 28, 2011, 06:45	update initial conditions every 10 iterations	#1
lindner Member Join Date: Mar 2010 Posts: 42 Rep Power: 16	Hi all, I'm testing the whole operation curve of a hydraulic turbine, but the net head is highly dependent of the mass flow. I want to update the Total Pressure inlet condition every 10 timesteps, to match the new losses. The inlet condition would be something like this: Ptotal,in = 115000[Pa] - k*Q^2 where k is a constant for losses and Q the massflow. is it possible to do with cel expressions to update the boundary every 10 or more iterations? Thank you in advance, lindner

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Compressible Nozzle Flow	sebastian	OpenFOAM Running, Solving & CFD	14	September 21, 2016 10:47
alphaEqn.H in twoPhaseEulerFoam	cheng1988sjtu	OpenFOAM Bugs	15	May 1, 2016 16:12
Velocity blows up suddenly after 30,000+ iterations	lordvon	OpenFOAM Running, Solving & CFD	15	October 19, 2015 13:52
Computational time	sunnysun	OpenFOAM Running, Solving & CFD	5	March 16, 2009 03:32
Negative value of k causing simulation to stop	velan	OpenFOAM Running, Solving & CFD	1	October 17, 2008 05:36

November 28, 2011, 09:06		#2
Cluain Member Join Date: Oct 2011 Posts: 32 Rep Power: 14	Yes, you can. However, you will have to do an expression for the current P rather than the total. Just set the input to an expression and define the expression for current pressure. CEL is quite easy to learn and there are quite a few specific examples in the tutorials provided with CFX, just watch the units. Hope this helps.

November 28, 2011, 10:41		#3
lindner Member Join Date: Mar 2010 Posts: 42 Rep Power: 16	Hi Martin, Thanks for the quick answer! The cel expression is ok now, the only problem is to force the cfx to execute this expression every x timesteps (without fortran). Im reading about user functions and user subroutine to find something about it.

November 28, 2011, 11:25		#4
Cluain Member Join Date: Oct 2011 Posts: 32 Rep Power: 14	Great, a simple iterative function should sort that. A bit of imagination and you will have it.