CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   CFX (https://www.cfd-online.com/Forums/cfx/)
-   -   To determine the conical volume in channel in the POST-CFD (https://www.cfd-online.com/Forums/cfx/96163-determine-conical-volume-channel-post-cfd.html)

melika January 14, 2012 09:15
To determine the conical volume in channel in the POST-CFD
 
Hello
Currently I am doing a research on circular channel with the water depth of 0.3 m
to single-phase.
Radius is 1.5 m.
How i can separate a conical volume in the circular channel in the POST-CFX?

melika January 14, 2012 15:08
To determine the conical volume in channel in the POST-CFX
 
Hello
Currently I am doing a research on circular channel with the water depth of 0.3 m
to single-phase.
Radius is 1.5 m.
How i can separate a conical volume in the circular channel in the POST-CFX?

ghorrocks January 14, 2012 19:04
If the conical volume you refer to is the fluid volume then yes, do a volume integral of volume fraction.


All times are GMT -4. The time now is 19:12.