CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   CFX (https://www.cfd-online.com/Forums/cfx/)
-   -   CFX solver error (https://www.cfd-online.com/Forums/cfx/96441-cfx-solver-error.html)

nitheshkumble January 23, 2012 09:43
CFX solver error
 
Dear all,

I am trying to simulate radial inflow turbine which is having approximately 50lacs mesh.
I am receiving following error
1. ERROR #001100279 has occurred in subroutine ErrAction.
| Message:
| Floating point exception: Overflow
2. | ERROR #001100279 has occurred in subroutine ErrAction.
| Message:
| Stopped in routine FPX: C_FPX_HANDLER
Please help me , what is this about?

ghorrocks January 23, 2012 16:40
Search the forum for floating point error. Been asked a miliion times. In short your simulation has diverged.

nitheshkumble January 24, 2012 06:38
Quote:
Originally Posted by ghorrocks (Post 340734)
Search the forum for floating point error. Been asked a miliion times. In short your simulation has diverged.
hi,
G horrocks.
i did the simulation for Rotor-stator(using Cfx Turbo tools) without any errors.
Then I started the simulation for full assembly(Volute,Nozzle,Rotor,Diffuser) with same boundry conditions as of rotor-stator.I am getting the error.Can you please help me in setting the problem.

ghorrocks January 24, 2012 16:35
Search the forum on floating point error. There are many posts with tips on how to deal with this error. I really should write an FAQ on this one.


All times are GMT -4. The time now is 19:34.