|
[Sponsors] |
March 13, 2012, 08:33 |
CEL Particle Mass/Diameter
|
#1 |
Member
Theodoros Papadopoulos
Join Date: Mar 2011
Posts: 36
Rep Power: 15 |
Hi
Does anyone know how I can define the Particle Mass or Particle Diameter using CEL language?? I know that the variable Particle Diameter exists, but when I am using for example to calculate the Mass of each particle depending on the Diameter Mp=Solid.Density*pi*4/3 [kg]* Particle Diameter^3 I get the message: the following unavailable variable:Particle Diameter Thank you very much in advance! |
|
March 14, 2012, 03:40 |
|
#2 |
Member
Theodoros Papadopoulos
Join Date: Mar 2011
Posts: 36
Rep Power: 15 |
Does anyone know? I would be really grateful if someone could answer today to my question, as there is only a short time left for the project!
|
|
March 14, 2012, 05:05 |
|
#3 |
Super Moderator
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,697
Rep Power: 143 |
Is particle mass a variable which is already available? Then you do not need to calculate it.
|
|
March 14, 2012, 05:18 |
|
#4 |
Member
Theodoros Papadopoulos
Join Date: Mar 2011
Posts: 36
Rep Power: 15 |
HI ghorrocks,
Thank you very much for your answer, but as far as I know ( i am not that expert with CFX) there is no variable for particle mass available in pre processing. I need the mass of the particle because I am trying to simulate the cooling of metal slag particles and we want to have a ratio between the glassy particles (quicker cooled down) and the crystalline particles (slower cooled down). |
|
March 14, 2012, 05:30 |
|
#5 |
Super Moderator
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,697
Rep Power: 143 |
Have you read the CFX reference guide? It has a list of available variables. It says the variable you are looking for is <Particle type>.Total Particle Mass so it appears you have the wrong variable name. It also suggests these variables are only available in post processing.
But why do you need this? Why don't you define different material properties to both types of particle and then CFX will handle the temperature? |
|
March 14, 2012, 06:23 |
|
#6 |
Member
Theodoros Papadopoulos
Join Date: Mar 2011
Posts: 36
Rep Power: 15 |
Thanks again for the answer!
As I said I had a llok at the reference guide and I found that is possible to use this variable in Pre Particle Diameter ! But when I am doing that I get the message: the following unavailable variable:Particle Diameter I cannīt define two different materials, because I want to evaluate the opereration of a dry slag granulator. I want to see if we can achieve with our current geometry the necessary ratio of 95% glassy particles. |
|
March 14, 2012, 16:20 |
|
#7 | |
Super Moderator
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,697
Rep Power: 143 |
The reference guide says the format for the variable is <particle type>.Particle Diameter, not just particle diameter by itself. And it says these variables are only available in post processing anyway so that does not help much if you want them in the solver.
Quote:
|
||
March 14, 2012, 16:32 |
|
#8 |
Member
Theodoros Papadopoulos
Join Date: Mar 2011
Posts: 36
Rep Power: 15 |
Thx again for the answer!
As I said at the beginning I have the slag particles with various diameters and I want to find out if the 2 meters of the test rig are adequate to cool down all the particles (no matter what diameter) in 0,5 s in order to have as I said above 95% glassy particles . The properties - thermal conductivity,density (more or less the same), Cp- for both end products (glassy + crystalline) are the same! Leave that, do you have any idea how I can define the particle mass or Diameter in Pre?? Thank you very much |
|
March 14, 2012, 16:52 |
|
#9 |
Super Moderator
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,697
Rep Power: 143 |
This thread seems to be going round in circles....
The documentation says you cannot access these variables in Pre or the solver. They are only available during post processing. I suspect if you need to access them in the solver you need to use user fortran. But you appear to be trying to do stuff which is already done by CFX in the particle heat model, you just need to define particles with the different properties of the different particle types. And properties goes beyond density and Cp, it also includes shape factors, radiation properties etc - if there is a cooling speed difference between these two types of particles some property is causing it. |
|
Tags |
cel particle diameter |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
UDF for multicomponent particle vaporization | Mohsin | Fluent UDF and Scheme Programming | 17 | January 27, 2021 02:57 |
dispersion model with lagragian particle tracking model for incompressible flows | eelcovv | OpenFOAM Running, Solving & CFD | 54 | April 10, 2018 09:36 |
Blood Damage Modelling via Particle Tracking in a Centrifugal Heart Pump | scatman | CFX | 7 | January 8, 2018 00:59 |
Problems involved heat transfer inside a particle and its thermal degradation | zhangr | STAR-CCM+ | 2 | August 25, 2011 06:59 |
DPM UDF particle position using the macro P_POS(p)[i] | dm2747 | FLUENT | 0 | April 17, 2009 01:29 |