How to assign the inlet B.C using a bunch of data set for an unsteady problem?

ali8500 · March 13, 2012, 22:51

Hello Guys,

I'm going to assign a bunch of data set as an inlet boundary condition. The problem is, the inlet B.C changes with time. For example at t=t1, I have to read the first data set and for the next timestep I have to read the next data set. Note that the problem is unsteady and I have to assign the velocity (u and V components) to the inlet boundary condition at different time step. For a steady problem, I know how to do that. I just need to use the "initialize profile data", but for an unsteady problem, I do not know how I should tackle the problem.
I would appreciate your help in advance.
Thanks,
Ali

Lance · March 14, 2012, 02:49

Search the forum, it has been asked many times before. Or, have a look here:
http://www.edr.no/blogg/ansys_blogge...nsient_profile

ali8500 · March 21, 2012, 13:55

Thanks, Lance for your reply. So, it means that I do not need to write a code to assign the boundary condition.

hesamking · March 28, 2012, 18:41

Dear Ali and Lance,
I input an excel data file using the link you gave.
It is the curve for a pulsatile blood flow.
I applied these data as my inlet B.C.
Actually CFX doesn't show any plot or anything
to make us sure that it is using the same curve?
do you know a way to verify the shape of curve from the data I input
in CFX? like when you enter an equation in expression part it gives
a plot according to the formula you entered and you can see if it is
taking the data in a good way or not?
Thank you,
Regards

March 13, 2012, 22:51	How to assign the inlet B.C using a bunch of data set for an unsteady problem?	#1
ali8500 New Member Ali Join Date: Dec 2011 Posts: 21 Rep Power: 14	Hello Guys, I'm going to assign a bunch of data set as an inlet boundary condition. The problem is, the inlet B.C changes with time. For example at t=t1, I have to read the first data set and for the next timestep I have to read the next data set. Note that the problem is unsteady and I have to assign the velocity (u and V components) to the inlet boundary condition at different time step. For a steady problem, I know how to do that. I just need to use the "initialize profile data", but for an unsteady problem, I do not know how I should tackle the problem. I would appreciate your help in advance. Thanks, Ali

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
steady RANS for flow problem with unsteady inlet?	kat	Main CFD Forum	0	February 16, 2009 10:24
Fan Modelling Problem in CFX	Jenny	CFX	8	September 11, 2007 13:59
which B.C. i should apply for this problem?	raivish	CFX	0	January 6, 2006 08:47
Need help: strange problem of unsteady B.C. UDF	Z. T.	FLUENT	0	April 11, 2003 19:03
what the result is negatif pressure at inlet	chong chee nan	FLUENT	0	December 29, 2001 05:13

March 14, 2012, 02:49		#2
Lance Senior Member Lance Join Date: Mar 2009 Posts: 669 Rep Power: 22	Search the forum, it has been asked many times before. Or, have a look here: http://www.edr.no/blogg/ansys_blogge...nsient_profile

March 21, 2012, 13:55		#3
ali8500 New Member Ali Join Date: Dec 2011 Posts: 21 Rep Power: 14	Thanks, Lance for your reply. So, it means that I do not need to write a code to assign the boundary condition.

March 28, 2012, 18:41		#4
hesamking Member Hesam Moghaddam Join Date: Mar 2012 Posts: 49 Rep Power: 14	Dear Ali and Lance, I input an excel data file using the link you gave. It is the curve for a pulsatile blood flow. I applied these data as my inlet B.C. Actually CFX doesn't show any plot or anything to make us sure that it is using the same curve? do you know a way to verify the shape of curve from the data I input in CFX? like when you enter an equation in expression part it gives a plot according to the formula you entered and you can see if it is taking the data in a good way or not? Thank you, Regards