CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

Error in FSI simulation

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 2, 2012, 02:32
Question Error in FSI simulation
  #1
Senior Member
 
Ashkan Javadzadegan
Join Date: Sep 2010
Posts: 230
Rep Power: 7
ashtonJ is on a distinguished road
Dear all,

I am doing FSI simulation in a constricted model. The following error occurred in the middle of solution.

ERROR #002100061 has occurred in subroutine SERVE_CLIENTS. |
| Message: |
| The connection between this CFX process and an external process |
| has died unexpectedly. The following error was received: |
| External process : ANSYS |
| Error experienced : Read


Does anybody know where the error comes from.
Thank you.
Regards,'
AshtonJ
ashtonJ is offline   Reply With Quote

Old   April 2, 2012, 10:36
Default
  #2
Senior Member
 
Lance
Join Date: Mar 2009
Posts: 522
Rep Power: 11
Lance is on a distinguished road
If you'd bother to use the search function on the forum you wound find that it's because the solid solver died. See the output from mechanical to found out why.
Lance is offline   Reply With Quote

Old   April 2, 2012, 19:36
Default
  #3
Senior Member
 
Ashkan Javadzadegan
Join Date: Sep 2010
Posts: 230
Rep Power: 7
ashtonJ is on a distinguished road
Thank you very much. The following crash recovery file is written, however, I don't know how I can open the file to see where the problem is from. Do you know how this crash file can help me to diagnose the problem.

"Fluid_006.res.er"

The following error message is also given:

Fatal error occurred when requesting Total Mesh Displacement for Interface.

Is this problem because of mesh?

appreciate your help.
Regards,
AshtonJ
ashtonJ is offline   Reply With Quote

Old   April 3, 2012, 02:05
Default
  #4
Senior Member
 
Lance
Join Date: Mar 2009
Posts: 522
Rep Power: 11
Lance is on a distinguished road
Have a look at the ANSYS.stdout and ANSYS.err files
Lance is offline   Reply With Quote

Old   April 11, 2012, 21:49
Default
  #5
Senior Member
 
Ashkan Javadzadegan
Join Date: Sep 2010
Posts: 230
Rep Power: 7
ashtonJ is on a distinguished road
Quote:
Originally Posted by Lance View Post
Have a look at the ANSYS.stdout and ANSYS.err files
Dear Lance,

I've got the same error message for a very simple FSI problem. I tried to do FSI simulation in a straight pipe with sinusoidal pressure waveform at inlet and zero pressure at outlet. First, I used very small mesh numbers for fluid and solid parts (8500 elements), the solution converged, however, I did not observe any mesh displacement, it was like a solid body. Then, I increased the number of mesh elements to 45000, the following error message was given:

"The connection between this CFX process and en external process has died unexpectedly. The following error message was received.
External process: Ansys
Error experienced: Read"

As you recommended, I checked ANSYS.stdout and ANSYS.err files, could not find any helpful information, there was just a warning that the “maximum number of stagger iterations has been reached for multifield solver but the interface quantities have not yet converged. The analysis will proceeds to the next time step. Increase number of
stagger iterations using the MFITER command for converged interface solution.”


There is an ANSYS FSI tutorial which is quite similar to my problem, it's "2way transient FSI in a hose". Does anybody know how I can find it. I tried to get it from Ansys customer portal web, however, could not find it.

Thank you.
regards,
AshtonJ
ashtonJ is offline   Reply With Quote

Old   April 12, 2012, 10:28
Default
  #6
New Member
 
zhiwei liu
Join Date: Mar 2009
Posts: 22
Rep Power: 8
lzw2003 is on a distinguished road
Hi,
i got this problem:
+--------------------------------------------------------------------+
| ERROR #001100279 has occurred in subroutine ErrAction. |
| Message: |
| CFX encountered the error: Read. Fatal error occurred when reque- |
| sting Total Mesh Displacement for interface.

this may be the same to some of ashtonJ's problem. Some say this may be the problem of the mesh, i will try it tomorrow.

Do you solve this problem? Could you give me some information?
lzw2003 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ansys FSI and CFX (valve simulation) farianka ANSYS 0 April 17, 2011 16:20
initial file for fsi modeling? mortazavi CFX 0 July 21, 2009 02:06
parallel run for fsi simulation??? smn CFX 2 July 19, 2009 04:04
problem in solving fsi simulation siavash CFX 5 July 10, 2009 11:59
how to extend FSI 2D codes to 3D, need advises abouziar Main CFD Forum 1 May 30, 2008 04:08


All times are GMT -4. The time now is 23:45.