CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

Problem in Solving tutorial no. 25 of CFX(ANSYS 14).

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 13, 2012, 06:13
Default Problem in Solving tutorial no. 25 of CFX(ANSYS 14).
  #1
New Member
 
jacob debbarma
Join Date: Apr 2012
Posts: 4
Rep Power: 4
jacob.debbarma is on a distinguished road
Hello I'm very new to Ansys 14 software, while dealing with turbo-machinery in solving the CFX tutorial no-25( centrifugal compressor aerodynamic and structural analysis)

I used
Angular Velocity:- 5000 RPM
Mass flow rate: - 0.53 kg.S^-1
Physical TimeScale:- 0.0002 S.

the CFX solver always returned------------

OUTER LOOP ITERATION = 132 ( 32) CPU SECONDS = 2.936E+03 (8.426E+02)
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.99 | 3.8E-04 | 4.7E-03 | 5.4E-04 OK|
| V-Mom | 0.98 | 5.1E-04 | 5.3E-03 | 4.2E-04 OK|
| W-Mom | 0.99 | 2.6E-04 | 5.6E-03 | 6.1E-03 OK|
| P-Mass | 0.92 | 1.3E-01 | 1.2E+01 | 5.3 2.7E-05 OK|
+----------------------+------+---------+---------+------------------+
| H-Energy | 0.99 | 1.2E-03 | 1.9E-02 | 5.3E-04 OK|
| T-Energy | 1.01 | 3.6E-05 | 1.3E-04 | 5.9 5.3E-04 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.98 | 3.7E-04 | 5.9E-03 | 5.8 1.8E-04 OK|
| E-Diss.K | 1.00 | 5.1E-04 | 2.6E-02 | 8.4 6.3E-05 OK|
+----------------------+------+---------+---------+------------------+
+--------------------------------------------------------------------+
| Notice: The maximum Mach number is 1.090E+03. |
+--------------------------------------------------------------------+

================================================== ====================
OUTER LOOP ITERATION = 133 ( 33) CPU SECONDS = 2.964E+03 (8.702E+02)
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+
| U-Mom | 0.99 | 3.8E-04 | 5.0E-03 | 5.3E-04 OK|
| V-Mom | 0.98 | 5.0E-04 | 5.2E-03 | 4.2E-04 OK|
| W-Mom | 0.99 | 2.6E-04 | 5.5E-03 | 6.1E-03 OK|
| P-Mass | 1.07 | 1.4E-01 | 1.2E+01 | 5.3 2.7E-05 OK|
+----------------------+------+---------+---------+------------------+
| H-Energy | 0.99 | 1.2E-03 | 1.8E-02 | 5.5E-04 OK|
| T-Energy | 1.01 | 3.6E-05 | 1.3E-04 | 5.9 5.5E-04 OK|
+----------------------+------+---------+---------+------------------+
| K-TurbKE | 0.99 | 3.7E-04 | 5.9E-03 | 5.8 1.7E-04 OK|
| E-Diss.K | 1.01 | 5.2E-04 | 2.9E-02 | 8.4 6.4E-05 OK|
+----------------------+------+---------+---------+------------------+
+--------------------------------------------------------------------+
| Notice: The maximum Mach number is 1.144E+03. |
+--------------------------------------------------------------------+

================================================== ====================
OUTER LOOP ITERATION = 134 ( 34) CPU SECONDS = 2.989E+03 (8.952E+02)
----------------------------------------------------------------------
| Equation | Rate | RMS Res | Max Res | Linear Solution |
+----------------------+------+---------+---------+------------------+

+--------------------------------------------------------------------+
| ERROR #001100279 has occurred in subroutine ErrAction. |
| Message: |
| Floating point exception: Overflow |
| |
| |
| |
| |
| |
+--------------------------------------------------------------------+

+--------------------------------------------------------------------+
| ERROR #001100279 has occurred in subroutine ErrAction. |
| Message: |
| Stopped in routine FPX: C_FPX_HANDLER |
| |
| |
| |
| |
| |
+--------------------------------------------------------------------+

+--------------------------------------------------------------------+
| An error has occurred in cfx5solve: |
| |
| The ANSYS CFX solver exited with return code 1. No results file |
| has been created. |
+--------------------------------------------------------------------+

End of solution stage.

+--------------------------------------------------------------------+
| The following user files have been saved in the directory |
| C:/Users/JACOB/Documents/11_04_2012_tutorial_compressor_with_user- |
| _design_data_2nd_TRY/13_04_2012_tutorial_compressor_with_user_des- |
| ign_data_pending_tasks/dp0_CFX_Solution/CFX_007: |
| |
| mon

...........................................

Last edited by jacob.debbarma; April 14, 2012 at 06:40.
jacob.debbarma is offline   Reply With Quote

Old   April 15, 2012, 18:59
Default
  #2
Super Moderator
 
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 9,726
Rep Power: 77
ghorrocks has a spectacular aura aboutghorrocks has a spectacular aura aboutghorrocks has a spectacular aura about
Your simulation has diverged, Do a search on the forum for "floating point error" for tips.
ghorrocks is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
SimpleFoam k and epsilon bounded nedved OpenFOAM Running, Solving & CFD 13 November 4, 2013 15:13
icoLagrangianFoam OF1.6 myNewParticleSolver heavy_user OpenFOAM 16 February 11, 2012 06:15
Upgraded from Karmic Koala 9.10 to Lucid Lynx10.04.3 bookie56 OpenFOAM Installation 8 August 13, 2011 05:03
Low Mach number Compressible jet flow using LES ankgupta8um OpenFOAM Running, Solving & CFD 7 January 15, 2011 14:38
MRFSimpleFoam amp cyclic patches david OpenFOAM Running, Solving & CFD 36 October 21, 2008 22:55


All times are GMT -4. The time now is 22:46.