Hex Core Mesh

LOCC · July 9, 2013, 09:02

Hi,

Could someone please list the steps needed to create a hex core mesh with a prismatic boundary layer in enGrid 1.4? I've tried creating the different parts of the mesh in different orders, i.e (1) BL -> tetra -> hex core or (2) hex core -> BL -> tetra) without success. In case (1) the hex core is somehow just not created and in case (2) the tetra mesher just ignores the hexa core and fills up the volume with tets.

Thanks in advance!

ogloth · July 10, 2013, 02:11

Hello,

that functionality is not finished yet, but all that is missing is to connect the hex core to the tet region. As it happened I will have a look at that today, because it is required for one of our own projects.

With a little luch it will be in the master branch on GitHub soon.

Cheers,
Oliver

atg · July 13, 2013, 18:46

Looks like it is limiting out at 1M cells

July 9, 2013, 09:02	Hex Core Mesh	#1
LOCC New Member Join Date: May 2011 Posts: 1 Rep Power: 0	Hi, Could someone please list the steps needed to create a hex core mesh with a prismatic boundary layer in enGrid 1.4? I've tried creating the different parts of the mesh in different orders, i.e (1) BL -> tetra -> hex core or (2) hex core -> BL -> tetra) without success. In case (1) the hex core is somehow just not created and in case (2) the tetra mesher just ignores the hexa core and fills up the volume with tets. Thanks in advance!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Moving mesh	Niklas Wikstrom (Wikstrom)	OpenFOAM Running, Solving & CFD	122	June 15, 2014 06:20
[blockMesh] BlockMesh number internal faces and boundary	ynos	OpenFOAM Meshing & Mesh Conversion	6	December 13, 2011 05:36
Icemcfd 11: Loss of mesh from surface mesh option?	Joe	CFX	2	March 26, 2007 18:10
How to control Minximum mesh space?	hung	FLUENT	7	April 18, 2005 09:38

July 10, 2013, 02:11		#2
ogloth Senior Member Oliver Gloth Join Date: Mar 2009 Location: Todtnau, Germany Posts: 121 Rep Power: 17	Hello, that functionality is not finished yet, but all that is missing is to connect the hex core to the tet region. As it happened I will have a look at that today, because it is required for one of our own projects. With a little luch it will be in the master branch on GitHub soon. Cheers, Oliver

July 13, 2013, 18:46		#3
atg Member Karl Join Date: Jan 2011 Posts: 36 Rep Power: 15	Looks like it is limiting out at 1M cells