|
[Sponsors] |
April 24, 2014, 16:57 |
create hex core mesh not available in 1.4?
|
#1 |
New Member
Join Date: Mar 2014
Posts: 11
Rep Power: 12 |
Hello,
im pretty new to enGrid. I read about the possibility to combine tet/prism layers and hex core meshes. This was the reason why I installed it... For the beginning i tried out the damper tutorial. I did everything pretty much like in the wiki for version 1.3 (http://engits.eu/wiki/index.php/Tuto...he_Volume_Mesh). So i got a prismatic boundary layer and I could add tet based volume mesh. But the option "create hex core mesh" in the Mesh menu stays grey.. Is this feature not activated yet or only in my installation or whats the matter with this feature? I installed it on Kubuntu 14.04 by building engrid according to the wiki. (https://github.com/enGits/engrid/wik..._Ubuntu_system) I hope anyone can answer my question. Thanks in advance! Julian |
|
April 25, 2014, 14:06 |
|
#2 | ||
Retired Super Moderator
Bruno Santos
Join Date: Mar 2009
Location: Lisbon, Portugal
Posts: 10,975
Blog Entries: 45
Rep Power: 128 |
Greetings Julian and welcome to the forum!
This answer by Oliver is still up-to-date regarding enGrid 1.4 (from July of 2013): http://www.cfd-online.com/Forums/eng...tml#post438811 post #2 Quote:
From a post last month: Quote:
Bruno |
|||
April 25, 2014, 17:03 |
|
#3 |
New Member
Join Date: Mar 2014
Posts: 11
Rep Power: 12 |
Thanks for your reply!
Best regards Julian |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[blockMesh] --> FOAM FATAL ERROR: Trying to specify a boundary face | A.A. | OpenFOAM Meshing & Mesh Conversion | 41 | June 26, 2020 07:06 |
[ANSYS Meshing] Questions regarding hex mesh | oj.bulmer | ANSYS Meshing & Geometry | 5 | February 23, 2014 12:01 |
[blockMesh] apparently the mesh doesn't want to be created in one direction | Maxime Thomas | OpenFOAM Meshing & Mesh Conversion | 1 | August 18, 2012 06:05 |
Convergence moving mesh | lr103476 | OpenFOAM Running, Solving & CFD | 30 | November 19, 2007 14:09 |
Icemcfd 11: Loss of mesh from surface mesh option? | Joe | CFX | 2 | March 26, 2007 18:10 |