creating improved surface mesh for imported geometry - project need assistance

eaglemckenna · July 16, 2014, 10:25

Hi

I am trying to use engrid to mesh geometry imported from blender, the geometry consist of a cube domain with inlet and outlet points at the top, and a seated human manikin - the idea being to evaluate thermal comfort.
I would include a screen shot but I do not know how to attach pictures on this forum as of yet

?

I have completed tutorials for engrid however, when I try to create an improved surface mesh for my cube domain, I receive error - i think the problem comes from the values I assign my max edge length and cell expansion value - are there any more detailed instructions for engrid 1.4??
my cube domain volume is 2x2x2 m^3

kind regards
g

eaglemckenna · July 17, 2014, 13:40

Attached is picture of model:
kind regards
g

eaglemckenna · July 18, 2014, 15:37

Hi
I am slightly confused here because in blender the model was deemed to be watertight however when I check the surface integrity within engrid it gives me a lot of bad cells and empty cells - also stating the model is not watertight.
When I return to blender and check the geometry it does indeed seem to meet the requirements.
is it possible to fix this within engrid interface or do I need to start again?
kind regards
g

eaglemckenna · July 18, 2014, 16:44

Sincere apologies guys
I got it sorted in the end!
kind regards as always
g

eaglemckenna · July 19, 2014, 16:14

Improved Geometry with inlet and outlet points overhead in an effort to replicate air conditioning in an aircraft - after the results have been analyzed for this simplified case the next step will be to run a simulation of an aircraft cabin domain.
It seems there are some shapes and meshes in blender that do not integrate into engrid.
If anyone has problems with blender engrid integration do not hesitate to contact me.
kind regards
g

eebrah · July 24, 2014, 19:48

Greetings,

I am trying to generate a mesh around a gully gratings with Engrid. I have built my fluid domain with blender after exporting my gully into STL file.
But when running create/improve surface mesh in engrid, no meshes are generated. I get this error "this seems to be a bug with engrid". I really appreciate help.

https://drive.google.com/folderview?...mM&usp=sharing, the link for my case

PS : I am using Engrid 1.2 and Blender 2.49

July 16, 2014, 10:25	creating improved surface mesh for imported geometry - project need assistance	#1
eaglemckenna Member Gowain Join Date: May 2014 Location: Ireland Posts: 86 Rep Power: 11	Hi I am trying to use engrid to mesh geometry imported from blender, the geometry consist of a cube domain with inlet and outlet points at the top, and a seated human manikin - the idea being to evaluate thermal comfort. I would include a screen shot but I do not know how to attach pictures on this forum as of yet ? I have completed tutorials for engrid however, when I try to create an improved surface mesh for my cube domain, I receive error - i think the problem comes from the values I assign my max edge length and cell expansion value - are there any more detailed instructions for engrid 1.4?? my cube domain volume is 2x2x2 m^3 kind regards g

July 18, 2014, 15:37	check surface integreity fail - model is not watertight	#3
eaglemckenna Member Gowain Join Date: May 2014 Location: Ireland Posts: 86 Rep Power: 11	Hi I am slightly confused here because in blender the model was deemed to be watertight however when I check the surface integrity within engrid it gives me a lot of bad cells and empty cells - also stating the model is not watertight. When I return to blender and check the geometry it does indeed seem to meet the requirements. is it possible to fix this within engrid interface or do I need to start again? kind regards g

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] Surface mesh not sticking to surface	holtwong	ANSYS Meshing & Geometry	2	April 20, 2023 08:28
[snappyHexMesh] Add Mesh Layers doesnt work on the whole surface	Kryo	OpenFOAM Meshing & Mesh Conversion	13	February 17, 2022 07:34
[snappyHexMesh] problems generating clean mesh	Christian_tt	OpenFOAM Meshing & Mesh Conversion	2	June 20, 2019 05:39
[Gmsh] 2D Mesh Generation Tutorial for GMSH	aeroslacker	OpenFOAM Meshing & Mesh Conversion	12	January 19, 2012 03:52
[ICEM] Automatic mesh generation script surface intersection problem	stuart23	ANSYS Meshing & Geometry	0	May 13, 2011 01:10

July 18, 2014, 16:44		#4
eaglemckenna Member Gowain Join Date: May 2014 Location: Ireland Posts: 86 Rep Power: 11	Sincere apologies guys I got it sorted in the end! kind regards as always g

July 24, 2014, 19:48		#6
eebrah New Member Join Date: Dec 2013 Posts: 16 Rep Power: 12	Greetings, I am trying to generate a mesh around a gully gratings with Engrid. I have built my fluid domain with blender after exporting my gully into STL file. But when running create/improve surface mesh in engrid, no meshes are generated. I get this error "this seems to be a bug with engrid". I really appreciate help. https://drive.google.com/folderview?...mM&usp=sharing, the link for my case PS : I am using Engrid 1.2 and Blender 2.49