[PierluigiRossi]

Hi all,

I have problems compiling Engrid with CGNS support.
I have modified the files in the src folder as follows:

engrid.pro:
I have added the line:
CONFIG += CGNS

engrid.pro.app:
I have added the line:
LIBS += -lcgns

libengrid.pro:
I have added the line:
DEFINES += CGNS_SUPPORT

I have the following error messages:
cgnswriter.cpp: In member function ‘void CgnsWriter::writeGrid()’:
cgnswriter.cpp:62:43: error: ‘Unstructured’ was not declared in this scope
if (cg_zone_write(fn,B,"main_grid",size,Unstructured, &Z)) {
^
cgnswriter.cpp:85:36: error: ‘RealDouble’ was not declared in this scope
if (cg_coord_write(fn, B, Z, RealDouble, "CoordinateX", coord_array, &C)) {
^
cgnswriter.cpp:94:36: error: ‘RealDouble’ was not declared in this scope
if (cg_coord_write(fn, B, Z, RealDouble, "CoordinateY", coord_array, &C)) {
^
cgnswriter.cpp:103:36: error: ‘RealDouble’ was not declared in this scope
if (cg_coord_write(fn, B, Z, RealDouble, "CoordinateZ", coord_array, &C)) {
^
cgnswriter.cpp:147:46: error: ‘TETRA_4’ was not declared in this scope
if (cg_section_write(fn, B, Z, "Tetras", TETRA_4, start, end, 0, elements, &S)) {
^
cgnswriter.cpp:172:48: error: ‘PYRA_5’ was not declared in this scope
if (cg_section_write(fn, B, Z, "Pyramids", PYRA_5, start, end, 0, elements, &S)) {
^
cgnswriter.cpp:198:46: error: ‘PENTA_6’ was not declared in this scope
if (cg_section_write(fn, B, Z, "Prisms", PENTA_6, start, end, 0, elements, &S)) {
^
cgnswriter.cpp:226:45: error: ‘HEXA_8’ was not declared in this scope
if (cg_section_write(fn, B, Z, "Hexes", HEXA_8, start, end, 0, elements, &S)) {
^
cgnswriter.cpp:249:49: error: ‘TRI_3’ was not declared in this scope
if (cg_section_write(fn, B, Z, "Triangles", TRI_3, start, end, 0, elements, &S)) {
^
cgnswriter.cpp:273:45: error: ‘QUAD_4’ was not declared in this scope
if (cg_section_write(fn, B, Z, "Quads", QUAD_4, start, end, 0, elements, &S)) {
^
cgnswriter.cpp: In member function ‘void CgnsWriter::writeBcs()’:
cgnswriter.cpp:303:66: error: ‘BCTypeNull’ was not declared in this scope
if (cg_boco_write(fn, B, Z, qPrintable(getBC(bc).getName()), BCTypeNull, ElementList, bc_faces.size(), data, &BC_cgns)) {
^
cgnswriter.cpp:303:78: error: ‘ElementList’ was not declared in this scope
if (cg_boco_write(fn, B, Z, qPrintable(getBC(bc).getName()), BCTypeNull, ElementList, bc_faces.size(), data, &BC_cgns)) {
^
cgnswriter.cpp: In member function ‘virtual void CgnsWriter:perate()’:
cgnswriter.cpp:320:42: error: ‘MODE_WRITE’ was not declared in this scope
if (cg_open(qPrintable(file_name), MODE_WRITE, &fn)) {
^
make[2]: *** [release/cgnswriter.o] Errore 1
make[2]: uscita dalla directory "/home/sas.itn/ianovalep/CFD_Software/engrid-release-1.4/src/libengrid"
make[1]: *** [release] Errore 2
make[1]: uscita dalla directory "/home/sas.itn/ianovalep/CFD_Software/engrid-release-1.4/src/libengrid"
make: *** [sub-libengrid-libengrid-pro-sub_Release_ordered] Errore 2

It seems that the include file is not linked well. Or there is compatibility version problem?
I am trying to install Engrid 1.4 from the source code and I have the cgns library v3.1.

Does someone have the same problem? Can you help me?
Thanks in advance.
(I hope to be clear enough..it is my first thread)

Pierluigi

[PierluigiRossi]

I have solved with the patch provided at this link:
https://github.com/wyldckat/engrid/c...9463040bd3da33