3D visualization help

ftalves · September 4, 2012, 19:10

Greetings.

I've been having severe difficulties getting the 3D mode ('stereo') to work on my projects.

I have a Quadro 4000 and am using NVIDIA's Vision 2 glasses, with the DIN-connected synchronizer. Also, I'm using an ASUS 3D monitor. My EnSight's version is 10.0.2(e).

On my most recent tries, either the stereo option remains greyed out or it shows the 'ghosts' intrinsic to 120Hz stereo 3D, but the glasses won't synchronize.

Any tips or thorough guides to make it work?

mjgraf · September 4, 2012, 21:34

have you tried using a CRT that vsyncs at 120Hz?

also, double check that the nvidia drivers stereo mode.

also, consult with CEI support about your problem. They normally have a solution already or will help find a solution to your problem. If your maintenance is current ;-)

ftalves · September 4, 2012, 21:45

Quote:

Originally Posted by mjgraf

have you tried using a CRT that vsyncs at 120Hz?

also, double check that the nvidia drivers stereo mode.

also, consult with CEI support about your problem. They normally have a solution already or will help find a solution to your problem. If your maintenance is current ;-)

Thank you. I have no CRT monitors capable of 120Hz available to me right now, so I can't check that, but I have checked all drivers and such.

I have also contacted CEI in January about it, but they still haven't replied...
Is it supposed to be intuitive to turn it on (in which case I would be sure the problem is in my end)?

mjgraf · September 4, 2012, 21:48

hmmmm. not sure.
I know the LCDs I have tried worked without much tinkering. But since they only did 60Hz were about useless.

My only thoughts at the moment are that it might be getting confused by the 3d display AND the stereo adapter being available.

ftalves · September 4, 2012, 21:50

Quote:

Originally Posted by mjgraf

hmmmm. not sure.
I know the LCDs I have tried worked without much tinkering. But since they only did 60Hz were about useless.

My only thoughts at the moment are that it might be getting confused by the 3d display AND the stereo adapter being available.

Ok. I'll try and tinker some on the NVIDIA side of things.
Thanks for advices, anyway.

ftalves · September 4, 2012, 23:15

I have found a workaround on the NVIDIA side of things.

It works on EnSight if I set the 3D to always show, as opposed to only function under 3D programs (in the NVIDIA Control Panel: Set up stereoscopic 3D -> Select when the display is in 3D mode).

Now, that means that my copy of EnSight does not appear to the system as a 3D application. Now the matter at hand is how to set EnSight up so the systems does see it as a 3D app.

September 4, 2012, 19:10	3D visualization help	#1
ftalves New Member Fabio Join Date: Sep 2012 Posts: 4 Rep Power: 13	Greetings. I've been having severe difficulties getting the 3D mode ('stereo') to work on my projects. I have a Quadro 4000 and am using NVIDIA's Vision 2 glasses, with the DIN-connected synchronizer. Also, I'm using an ASUS 3D monitor. My EnSight's version is 10.0.2(e). On my most recent tries, either the stereo option remains greyed out or it shows the 'ghosts' intrinsic to 120Hz stereo 3D, but the glasses won't synchronize. Any tips or thorough guides to make it work?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Visualization of higher order solution	shyamdsundar	Main CFD Forum	1	July 23, 2010 03:55
Visualization Software for CFD	Paul	Main CFD Forum	3	March 25, 2006 17:16
help: flow visualization library	soofuu	Main CFD Forum	3	September 28, 2000 10:54
CFX4-Interface for OpenDX Visualization Software?	Doris Rieger	Main CFD Forum	0	December 1, 1999 06:41
Flow Visualization of impinging swirling flow on the wall.	sangaria	Main CFD Forum	2	March 26, 1999 13:31

September 4, 2012, 21:34		#2
mjgraf Senior Member Join Date: Dec 2009 Posts: 131 Rep Power: 19	have you tried using a CRT that vsyncs at 120Hz? also, double check that the nvidia drivers stereo mode. also, consult with CEI support about your problem. They normally have a solution already or will help find a solution to your problem. If your maintenance is current ;-)

September 4, 2012, 21:48		#4
mjgraf Senior Member Join Date: Dec 2009 Posts: 131 Rep Power: 19	hmmmm. not sure. I know the LCDs I have tried worked without much tinkering. But since they only did 60Hz were about useless. My only thoughts at the moment are that it might be getting confused by the 3d display AND the stereo adapter being available.

September 4, 2012, 23:15		#6
ftalves New Member Fabio Join Date: Sep 2012 Posts: 4 Rep Power: 13	I have found a workaround on the NVIDIA side of things. It works on EnSight if I set the 3D to always show, as opposed to only function under 3D programs (in the NVIDIA Control Panel: Set up stereoscopic 3D -> Select when the display is in 3D mode). Now, that means that my copy of EnSight does not appear to the system as a 3D application. Now the matter at hand is how to set EnSight up so the systems does see it as a 3D app.