CFD Online Logo CFD Online URL
Home > Forums > FloEFD, FloWorks & FloTHERM

"Automatically load parts lightweight" Message

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   February 28, 2013, 04:50
Default "Automatically load parts lightweight" Message
New Member
WookJin Kim
Join Date: Feb 2012
Posts: 23
Rep Power: 5
JosephKim is on a distinguished road
"Automatically load parts lightweight" Message

What is it?

I did as a message command.

Tools -> Options -> Performance -> Automatically load Parts lightweight DISABLED!

But I can't disable the "Lightweight"
There is already state that I can't click.

Simulation can not running lightweight component.

So.. What can I do for this problem?

Please Help me to say some advise..
JosephKim is offline   Reply With Quote

Old   March 20, 2013, 05:30
Senior Member
Boris Marovic
Join Date: Jul 2009
Posts: 389
Rep Power: 12
Boris_M is on a distinguished road
Hi JosephKim,

in this case it is best to contact your SW reseller and ask for his help. Your parts have to be all none lightweight for the simulation. If you unceck that option I would guess it doesn't necessarily resolve all parts. You might have to check if the parts are really not lightweight anymore and if not, then maybe try to manually deactivate the lightweight setting for these parts individually.
But I'm no expert in SW.

Also you could try to search the internet for this problem, maybe there is a SW forum where it was explained.

I hope this helps,
Boris_M is offline   Reply With Quote

Old   April 22, 2013, 09:27
New Member
WookJin Kim
Join Date: Feb 2012
Posts: 23
Rep Power: 5
JosephKim is on a distinguished road
Thank you Boris
You are advice always be of help to me.
JosephKim is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Cfd to ansys thermal to ansys structural interface ssixr ANSYS 17 July 31, 2015 15:18
Error Message while trying to load ParaView Online Help akku ParaView 2 March 6, 2013 01:47
foamToVTK: load all the parts at once lovecraft22 OpenFOAM Post-Processing 0 March 18, 2012 09:59
single directional message transmit in parallel model su_junwei OpenFOAM Programming & Development 1 December 17, 2009 08:00
Error message in CFX-10 CFDworker CFX 2 October 12, 2007 07:23

All times are GMT -4. The time now is 23:47.