Pressure distribution into Mechanica

-mAx- · September 10, 2013, 01:40

Hello,
Do we need a special installation of ProMechanica, for importing a pressure distribution on a surface from FloEFD (for Creo) into ProMechanica?
Thank you for any information

Boris_M · September 16, 2013, 02:41

Hi Maxime,
no, you shouldn't.
Do you have any troubles applying the pressure distribution?

Boris

-mAx- · September 17, 2013, 01:26

Hello Boris,
Now it is ok, I found the option in pressure load's panel
Now I have to play a little bit with this tool, because ProM is asking me the value of the pressure, (but it is supposed to be calculated with FloEFD).
I will run a job with a pressure of 1 Pa to see what FloEFD is exporting exactly ...
From the pressure load panel, I understand I loaded an extern field coefficient and not a true pressure load
anyway, I will digg it
Untitled.png

Boris_M · September 17, 2013, 06:31

Hi Maxime,

I have a how-to guide for you if you send me your email adress in a private message. Or you can also find it on our SupportNet website.

Regards,
Boris

PS: Grüße aus Frankfurt :-) I saw your german GUI

September 10, 2013, 01:40	Pressure distribution into Mechanica	#1
-mAx- Super Moderator Maxime Perelli Join Date: Mar 2009 Location: Switzerland Posts: 3,297 Rep Power: 41	Hello, Do we need a special installation of ProMechanica, for importing a pressure distribution on a surface from FloEFD (for Creo) into ProMechanica? Thank you for any information __________________ In memory of my friend Hervé: CFD engineer & freerider

September 17, 2013, 01:26		#3
-mAx- Super Moderator Maxime Perelli Join Date: Mar 2009 Location: Switzerland Posts: 3,297 Rep Power: 41	Hello Boris, Now it is ok, I found the option in pressure load's panel Now I have to play a little bit with this tool, because ProM is asking me the value of the pressure, (but it is supposed to be calculated with FloEFD). I will run a job with a pressure of 1 Pa to see what FloEFD is exporting exactly ... From the pressure load panel, I understand I loaded an extern field coefficient and not a true pressure load anyway, I will digg it Untitled.png __________________ In memory of my friend Hervé: CFD engineer & freerider

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
cavitation model pressure distribution	Rahmat Arazgaldy	FLUENT	1	May 16, 2012 15:48
Airfoil pressure distribution	kanishkpanchal	Main CFD Forum	2	December 7, 2009 13:21
Pressure Rise Error	emueller	CFX	0	May 5, 2009 11:08
Does star cd takes reference pressure?	monica	Siemens	1	April 19, 2007 11:26
Hydrostatic pressure in 2-phase flow modeling (CFX4.2)	HB &DS	CFX	0	January 9, 2000 13:19

September 16, 2013, 02:41		#2
Boris_M Disabled Join Date: Jul 2009 Posts: 616 Rep Power: 23	Hi Maxime, no, you shouldn't. Do you have any troubles applying the pressure distribution? Boris

September 17, 2013, 06:31		#4
Boris_M Disabled Join Date: Jul 2009 Posts: 616 Rep Power: 23	Hi Maxime, I have a how-to guide for you if you send me your email adress in a private message. Or you can also find it on our SupportNet website. Regards, Boris PS: Grüße aus Frankfurt :-) I saw your german GUI