CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FloEFD, FloWorks & FloTHERM

pressure drop

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 11, 2008, 19:51
Default pressure drop
  #1
derek
Guest
 
Posts: n/a
I am new to the program and my company has recently acquired floworks 2007. I am trying to get started by trying to set up the program to determine the amount of pressure drops between the inlet and the outlet. I have the amount of inlet pressure and the amount of flow that will be restricted coming out of the outlet. How can I set up floworks to show me the amount of pressure I can see coming out at the output when I change different parameters of my design. Thanks
  Reply With Quote

Old   July 14, 2008, 00:59
Default Re: pressure drop
  #2
Nick Sessions
Guest
 
Posts: n/a
Have you seen the "First Steps - Ball Valve Design" tutorial (specifically the equation goal)? /n
  Reply With Quote

Old   September 4, 2008, 08:47
Default Re: pressure drop
  #3
Murat
Guest
 
Posts: n/a
First at inlet you can create boundary condition which is mass flow rate or velocity etc. And then at the outlet you can apply the pressure static or enviroment what you want. It is not important how much the pressure is at the outlet because you search only Delta P. And then you should create a goal for inlet- Surface Goal bulk av static pressure-. At the end you should determine equation goal like this Enviroment Pressure- Your goal. That's all.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
pressure drop in the pipe mike.mm FLUENT 6 February 7, 2011 10:31
Pipe Flow - Pressure Drop Daniel L FLOW-3D 2 December 10, 2010 04:23
Total and static pressure drop Janakiram CD-adapco 1 February 8, 2009 01:32
Pressure Drop at entrance of a rotor-stator. Resnick Main CFD Forum 0 November 20, 2007 14:50
Periodic boundaries and pressure drop MatejK CFX 2 July 12, 2005 04:47


All times are GMT -4. The time now is 19:37.