CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FloEFD, FloWorks & FloTHERM (http://www.cfd-online.com/Forums/floefd-floworks-flotherm/)
-   -   cryogenic simulation (http://www.cfd-online.com/Forums/floefd-floworks-flotherm/74813-cryogenic-simulation.html)

mbr April 9, 2010 03:15

cryogenic simulation
 
Hello,


I am currently using FloEFD to simulate a two stages cryo head. The first stage works at 35 K with a thermic power of 30 W and the second stage works at 4 K with a thermic power of 1W. On these two stages there are materials to generate a supersonic beam.
The results of the simulations are not correct since there are inconsistencies between temperatures and the flux that I should obtained.
Does anyone have experience with cryogenic simulation? Does anyone have advice on cryogenic simulations?


Thanks in advance,
Marc.


All times are GMT -4. The time now is 07:03.