Delineate Boundary condition

mderosca · July 9, 2012, 06:02

Hi to all,

I want to delineate my Boundary spicified velocity condition in x cordinates.

My Mesh Block has 2 meters wide and my inlet condition is only in 0.20 meters.

How can I delineate the Boundary condition in X direction?!

mderosca · September 14, 2012, 07:57

Already solutionated with multiblock geometry.

JBurnham · September 18, 2012, 11:58

Use components or baffles to block off the other 1.8m of the upstream boundary that are not open to flow.

mderosca · September 18, 2012, 13:20

Thanks for the reply.

After some time working with the code I've arrived to several solutions. The option of block the entry seems to be the better.

Hamed&honey · September 28, 2012, 05:55

Hi dear mderosca
can you explain details.

mderosca · October 1, 2012, 05:04

With multi-blocks you can define a Mesh-block to determinate the inlet of fluid and another to determinate the Domain region. This procedure presents problems asociated to multi-blocks geometries (see in Flow 3D user's web).

And using components or baffles to block the entry (as said JBurnham) you can use only one mesh block with elements (solid elements) to block the parts of the domain. Is easier and faster than multi-block model.

July 9, 2012, 06:02	Delineate Boundary condition	#1
mderosca New Member mderosca Join Date: Jul 2012 Posts: 5 Rep Power: 13	Hi to all, I want to delineate my Boundary spicified velocity condition in x cordinates. My Mesh Block has 2 meters wide and my inlet condition is only in 0.20 meters. How can I delineate the Boundary condition in X direction?!

October 1, 2012, 05:04	Reponse	#6
mderosca New Member mderosca Join Date: Jul 2012 Posts: 5 Rep Power: 13	With multi-blocks you can define a Mesh-block to determinate the inlet of fluid and another to determinate the Domain region. This procedure presents problems asociated to multi-blocks geometries (see in Flow 3D user's web). And using components or baffles to block the entry (as said JBurnham) you can use only one mesh block with elements (solid elements) to block the parts of the domain. Is easier and faster than multi-block model.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Domain Imbalance	HMR	CFX	5	October 10, 2016 05:57
Can anyone give me some hint on how to make traction free boundary condition?	poplar	OpenFOAM	3	January 14, 2015 02:37
Boundary Conditions	Thomas P. Abraham	Main CFD Forum	20	July 7, 2013 05:05
Setting outlet Pressure boundary condition using CAFFA code	Mukund Pondkule	Main CFD Forum	0	March 16, 2011 03:23
How to set boundary condition in Fluent for the fo	Peiyong	FLUENT	1	November 10, 2006 11:44

September 14, 2012, 07:57		#2
mderosca New Member mderosca Join Date: Jul 2012 Posts: 5 Rep Power: 13	Already solutionated with multiblock geometry.

September 18, 2012, 11:58		#3
JBurnham Senior Member Jeff Burnham Join Date: Apr 2010 Posts: 204 Rep Power: 17	Use components or baffles to block off the other 1.8m of the upstream boundary that are not open to flow.

September 18, 2012, 13:20		#4
mderosca New Member mderosca Join Date: Jul 2012 Posts: 5 Rep Power: 13	Thanks for the reply. After some time working with the code I've arrived to several solutions. The option of block the entry seems to be the better.

September 28, 2012, 05:55		#5
Hamed&honey New Member Ham Ta Join Date: May 2010 Posts: 18 Rep Power: 15	Hi dear mderosca can you explain details.