CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLOW-3D (http://www.cfd-online.com/Forums/flow-3d/)
-   -   Hybrid Shallow Water/3D Flow Model (http://www.cfd-online.com/Forums/flow-3d/107071-hybrid-shallow-water-3d-flow-model.html)

Hamed&honey September 17, 2012 04:38

Hybrid Shallow Water/3D Flow Model
 
Hi everybody,
which version of Flow-3D support (Hybrid Shallow Water/3D Flow Model) model?
I have problem to setup physics and meshing
best regards

ara_nersesian September 17, 2012 08:11

hi
in FLOW-3D Version 10.0 you can do what you want in shallow 3d modling
it have i sample which showing a reiver with a shallow water runing
i am new in flow-3d i made my mesh and geometries plus a horizental pump i want to cheange direction if you knew the answer i will be glad with your repplay

JBurnham September 18, 2012 12:00

Combining 3-D mesh blocks (full 3-D solution) with Shallow Water mesh blocks (2-D depth-averaged solution) will be available in v10.1, which is due out later this year. Until then, you must use either the depth-averaged shallow water model OR the full 3-D solution, but not both.

Hamed&honey September 19, 2012 02:13

Thank you body for your kind attention,
Now I know what should I do :)

Hamed&honey September 19, 2012 02:21

Thank you body for your kind attention,
Now I know what should I do :)

Hamed&honey September 19, 2012 02:27

Thank you body for your kind attention,
Now I know what should I do :)


All times are GMT -4. The time now is 06:42.