about modelling of baffles in Flow-3D
 

Hi buddies,

I am self-learning Flow-3D to try to simulate the rank sloshing with baffles insides. now i can do the case of without baffle. but while baffles added in, i mean that baffles are plates with somh big holes in center area. Shall I input those baffles with STL and placed them into correct design position then do the boundary setting? Or I can use the baffles definition inside ( i once tried. no respone...).

Could you please post here some of your ideas on modelling baffles if it came from STL geometry and how to define the boundary condition of it?

so many appreciates... :p