FLOW-3D Redhat Lunch problem

BAssem.at · February 14, 2013, 09:34

Hi,
I need help.

I have pb whene i am starting to lunching flow3d in redhat after configuration described in documentation, the message error is:

/home/..../v10.0/gui/lib/ifort/liinf.so : no version information avaliable (required by /home/..../flow3d : line 3 : 30454 Erreur de segmentation).

Please help.
Thank's

dmilano · February 28, 2013, 10:14

You probably need to set LD_LIBRARY_PATH. There is a file called README in the installation directory that gives an explanation and tells you where to point it.

February 14, 2013, 09:34	FLOW-3D Redhat Lunch problem	#1
BAssem.at New Member Athmani Bassem Join Date: Dec 2011 Posts: 12 Rep Power: 3	Hi, I need help. I have pb whene i am starting to lunching flow3d in redhat after configuration described in documentation, the message error is: /home/..../v10.0/gui/lib/ifort/liinf.so : no version information avaliable (required by /home/..../flow3d : line 3 : 30454 Erreur de segmentation). Please help. Thank's

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
flow past abdominal aorta. Complex BC problem.	ziemowitzima	OpenFOAM Running, Solving & CFD	0	April 5, 2010 13:30
CFX-Post: problem with mass flow	Markus	CFX	5	February 19, 2005 17:30
transient compressible flow problem (urgent plz)	jehanzeb	FLUENT	5	August 3, 2004 08:04
Inviscid Drag at subsonic, subcritical Mach #	Axel Rohde	Main CFD Forum	1	November 19, 2001 12:19
fluid flow fundas	ram	Main CFD Forum	5	June 17, 2000 21:31

February 28, 2013, 10:14		#2
dmilano Member Join Date: Mar 2012 Posts: 52 Rep Power: 3	You probably need to set LD_LIBRARY_PATH. There is a file called README in the installation directory that gives an explanation and tells you where to point it.