CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > FLOW-3D

void region problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 12, 2013, 22:34
Default void region problem
  #1
New Member
 
jinxing liu
Join Date: Dec 2013
Posts: 2
Rep Power: 0
ljx151126 is on a distinguished road
Hi,everyone. When I run a sediment scour model, the solver stopped abnormaly. The warning and error messages are: void region problem, surface cell with no adjacent void at i=85, j=60, k=28. I want to know how to solver this problem. Thank you very much.
ljx151126 is offline   Reply With Quote

Old   December 15, 2013, 22:07
Default
  #2
Senior Member
 
Jeff Burnham
Join Date: Apr 2010
Posts: 204
Rep Power: 16
JBurnham is on a distinguished road
That's an old bug that has been fixed in 10.1.1, the latest version. I ran into that problem too. - J
JBurnham is offline   Reply With Quote

Old   December 15, 2013, 22:27
Default
  #3
New Member
 
jinxing liu
Join Date: Dec 2013
Posts: 2
Rep Power: 0
ljx151126 is on a distinguished road
Dear Jeff Burnham
I really appreciate your help. I use the version 10.0.1 to do simulation. So I cann't continue my sediment scour model?
Thanks greatly.
ljx151126 is offline   Reply With Quote

Old   December 18, 2013, 21:32
Default
  #4
Senior Member
 
Jeff Burnham
Join Date: Apr 2010
Posts: 204
Rep Power: 16
JBurnham is on a distinguished road
You can try using a different mesh configuration, but otherwise, you'll need to update the software: there's a menu at the top (Utilities > Auto-update) that will let you get a later version, but you'll need a username and password from Flow Science.
JBurnham is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Other] engineFoam new mesh problem ayhan515 OpenFOAM Meshing & Mesh Conversion 5 August 10, 2015 09:45
[Gmsh] Import problem ARC OpenFOAM Meshing & Mesh Conversion 0 February 27, 2010 11:56
void region and itb=0 ehsan FLOW-3D 2 January 26, 2009 12:53
OpenFoam 14 installation problem gfcoppola OpenFOAM Installation 20 November 2, 2007 14:38
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Meshing & Mesh Conversion 2 July 15, 2005 05:15


All times are GMT -4. The time now is 07:55.