CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLOW-3D (http://www.cfd-online.com/Forums/flow-3d/)
-   -   Congratulations! (http://www.cfd-online.com/Forums/flow-3d/27234-congratulations.html)

Byongjun Park October 1, 2008 07:05

Congratulations!
 
Hello. My name is Byongjun Park and I work as a research fellow in Hydraulic Div., Rural Research Institute, KRC, Korea.

My research interest are Hydraulic and Coastal Engineering. So I use the FLOW-3D for simulation of flow on weir at spillway, gate structure, and intake power plant, sometime, wave at breakwater. Moreover I do hydraulic physical scale model test.

It is a matter for congratulatioin that open the FLOW-3D user forum and it's my pleasure.

I'm not a native English speaker so I'm poor English. But I will often visit the forum.

Thank you.

MAB October 2, 2008 06:27

Re: Congratulations!
 
Nice to know about your research. I am sure being an experienced Flow-3D user , your advice would be very helpful in setting up simulations . Many thanks for your introduction.
:) MAB


All times are GMT -4. The time now is 09:22.