CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > FLOW-3D

Mass sources

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 19, 2008, 10:07
Default Mass sources
  #1
Nikolaos
Guest
 
Posts: n/a
Hello!

I am refering to the feature of Mass sources in Physics tab in v9.3. I want to simulate a nozzle, so I enter all the requested data in mass source fields, but then I cannot simulate my model, even the preprocessing is disabled as an option. Of cource, I have done the geometry and the fluid properties and all the other necesssary. So, if I simply put a boundary condition, without the mass source, my model runs, whereas when I substitute my boundary condition for a mass source it doesn't run. Is there anything else that supplements mass source during model setup? Or, how am I going to setup it successfully with a mass source?

Thanks in advance!!
  Reply With Quote

Old   January 10, 2009, 01:22
Default Re: Mass sources
  #2
kyunghwan
Guest
 
Posts: n/a
Hi Nikolaos!

That is our web page.

http://www.flow3d.co.kr/UserSupport.aspx

Mass source example is in hear.

kyunghwan.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Questions about Mass Sources jiguozhao CFX 20 January 29, 2020 12:08
mass flow in is not equal to mass flow out saii CFX 12 March 19, 2018 06:21
Water subcooled boiling Attesz CFX 7 January 5, 2013 04:32
Add total mass using sources to multi component fluids mullenc525 CFX 1 February 5, 2011 05:56
Mass sources - help! Emmanuel Resch Siemens 11 May 29, 2008 11:20


All times are GMT -4. The time now is 15:02.