CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > FLOW-3D

FLOW 3D Layers deposition

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 5, 2019, 06:13
Default FLOW 3D Layers deposition
  #1
New Member
 
tirupataiah
Join Date: Dec 2019
Posts: 1
Rep Power: 0
Kasani Tirupataiah is on a distinguished road
Hello Everyone

FLOW 3D V9.3: In welding simulation for two layer one over the other first layer deposited but during the deposition of the second layer weld pool formed is moving completely along along with arc (in the length direction) without any material deposition over the first layer so that at the end of simulation time the formed weld pool is moving to the end position but without any material deposition left over the first layer during travel.

What are the reasons for this condition in flow 3D?
how can i overcome this?

Please guide/suggest me with proper useful information to solve this...

Thanking you in ADVANCE.

Last edited by Kasani Tirupataiah; December 11, 2019 at 01:47.
Kasani Tirupataiah is offline   Reply With Quote

Old   March 2, 2020, 16:26
Default
  #2
Senior Member
 
thunde47
Join Date: Dec 2015
Location: India, USA
Posts: 128
Blog Entries: 1
Rep Power: 10
thunde47 is on a distinguished road
This should not happen. Likely some mistakes made in the simulation setup. can you post the image, please?
thunde47 is offline   Reply With Quote

Reply

Tags
flow 3d, layers, weldpool

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Internal Flow Instability with layers Zephiro88 OpenFOAM Running, Solving & CFD 1 June 20, 2019 05:20
Gate valve flow simulations... nikesh FloEFD, FloWorks & FloTHERM 5 January 28, 2014 02:31
transient, impregnating flow problem fgommer FLUENT 0 February 29, 2012 17:10
Non-steady flow simplified for use in Vissim steamerandy Main CFD Forum 0 October 31, 2011 22:08
Boundary layers in supersonic flow bob Will Main CFD Forum 4 April 24, 2000 00:19


All times are GMT -4. The time now is 20:27.