CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   FLOW-3D (http://www.cfd-online.com/Forums/flow-3d/)
-   -   A mesh block with three mesh block to use the difference? (http://www.cfd-online.com/Forums/flow-3d/65760-mesh-block-three-mesh-block-use-difference.html)

degr June 25, 2009 04:19

A mesh block with three mesh block to use the difference?
 
I run an example to follow when
Have to see this part of mesh block, not very understanding,
So would like to ask you,
A mesh block with three mesh block to use the difference?

H.C June 26, 2009 13:14

how many mesh blocks do you have?
are you trying to do mesh sensitivity test with different cell size?
or you want to view the full geometry when you have three mesh blocks?

degr June 26, 2009 13:45

Quote:

Originally Posted by H.C (Post 220638)
how many mesh blocks do you have?
are you trying to do mesh sensitivity test with different cell size?
or you want to view the full geometry when you have three mesh blocks?


I have not tried a different grid, I will try to take a look at the;
H.C, you are willing to guide the division when I do?

H.C June 26, 2009 14:51

what I meant was I am not sure what your problem is?


All times are GMT -4. The time now is 03:43.